Tuscan mk2 dashboard display remains on

[MackieTVR]

Hi - As anyone experienced their dashboard display & LEDs staying on for about 20 seconds on the Wavy dashboard model after switching the ignition off and removing the key?
This happens intermittently but generally after a run
Any advise appreciated
Thank you

[MackieTVR]

Thank you- can you point me in the direction of what other forums I may be able to search for this?

[MackieTVR]

That's really helpful thanks - I'll call Ian - I'm not sure what the TVR&#12856 means, is that a reference number of some sort?
Thanks again Paul

[MackieTVR]

That's really helpful thanks - I'll call Ian - I'm not sure what the TVR&#12856 means, is that a reference number of some sort?
Thanks again Paul

[MackieTVR]

Thanks again Tony - I spoke with Ian this morning (I must say he was very helpful), he sais this is a very simple fix, it is the result of feedback on the alternator - Takes 5 minutes to fit a Suppressor on the Alternator
The next challenge is a 3.5 hour journey to TorqueRVT

[MackieTVR]

Tony - I'm going brave with a couple of friends next Sunday- I bought a suppressor and were going to fit it ourselves, at the same time I'm going to change the hot leads to Magnecores !!
Watch this space

[MackieTVR]

Tony - I'm going brave with a couple of friends next Sunday- I bought a suppressor and were going to fit it ourselves, at the same time I'm going to change the hot leads to Magnecores !!
Watch this space

[MackieTVR]

Tony - I'm going brave with a couple of friends next Sunday- I bought a suppressor and were going to fit it ourselves, at the same time I'm going to change the hot leads to Magnecores !!
Watch this space

[MackieTVR]

Unfortunately no luck today, we wired the suppression capacitor between the Alternator output and Earth and the fault remains, strange as I have the same symptoms that when I touch the break pedal the dashboard goes off immediately .
At least why I had the bonnet off we were able to fit new plugs & Magnecores plus a new power steering relay for reliability

So if anyone else reading this thread has any ideas please let me know