Discussion
Hi
I wonder if anyone can help, I went down a large pothole yesterday and the passenger door window came down to the open door position and door open registered on the dash and now the window will not close and door open is always on the dash.
Right here goes will try to explain.
Took the panel off from behind the b pillar there are two connectors one from the micro switch and one that operates the door solenoid to open it. Cleaned all connectors but no joy window still in door open position and door open on the LCD. Now the odd bit disconnected the micro switch connector and the window now closes using the console Knob, so closed the window and opened the door window dropped and door opened as it should, closed door window didn't close but door open now not showing on dash.
confused
I wonder if anyone can help, I went down a large pothole yesterday and the passenger door window came down to the open door position and door open registered on the dash and now the window will not close and door open is always on the dash.
Right here goes will try to explain.
Took the panel off from behind the b pillar there are two connectors one from the micro switch and one that operates the door solenoid to open it. Cleaned all connectors but no joy window still in door open position and door open on the LCD. Now the odd bit disconnected the micro switch connector and the window now closes using the console Knob, so closed the window and opened the door window dropped and door opened as it should, closed door window didn't close but door open now not showing on dash.
confused
Gassing Station | Tuscan | Top of Page | What's New | My Stuff