Idle issues...
Discussion
Still with issues adjusting idle... think now I know where's the issue... I have adjusted the screw to idle 900 rpm. After 2 or 3 minutes drops to 700 rpm. If I reset the throttle position (ecu)goes immediately back to 900. After 5 minutes goes back to 700... sometimes stays longer but as the time goes reverts to 700. Any thoughts?
Hi Sagi,
Thank you, to clear my thoughts... I was exactly pointing to the Dallas Nvram.
I have clean a big number of earth connectors... just peace of mind.
I was about to order the dallas ram, remember a post a while back with someone with issues with lambda and adaptatives, turns out Dallas... I have order the DS1230AB-70IND+ see if works...
Thank you, to clear my thoughts... I was exactly pointing to the Dallas Nvram.
I have clean a big number of earth connectors... just peace of mind.
I was about to order the dallas ram, remember a post a while back with someone with issues with lambda and adaptatives, turns out Dallas... I have order the DS1230AB-70IND+ see if works...
still all the same after changing the Dallas.... now failed doing the MOT lambda measured 1.17 the limit on the MOT (NCT) in Ireland is 1.03.... bought 2 new Catalytic converters and got ok on the co2 emissions but still failing in Lambda.. any help ?
Edited by helderteixeira on Wednesday 30th November 12:47
Gassing Station | Tuscan | Top of Page | What's New | My Stuff