Code I

[T88CAN]

Had this code come on today followed by the oil temp reading dropping
to 0deg, Does anybody know where the reading is taken from? I`m
hoping it`s just a loose connection on the sender/sensor
unless you know different!!

[T88CAN]

Mr Freefall said:

Tony Tuscan Dashboard Diagnosic codes A - Speedo not activating zero switch/switch failed/open circuit B - Speedo not releasing zero switch/switch failed/short to earth C - Water not activating zero switch/switch failed/open circuit D - Water not releasing zero switch/switch failed/short to earth E - Fuel not activating zero switch/switch failed/open circuit F - Fuel not releasing zero switch/switch failed/short to earth G - Water temperature sensor input open circuit H - Air temperature sensor input open circui I - Oil temperature sensor input open circuit J - Oil presure sensor input open circuit K - Fuel level sensor input open circuit L - Erratic road speed signal input M N O - No communication between analogue and control up Hope this is not too late >> Edited by Mr Freefall on Tuesday 27th April 13:36

Thanks Gary, I know what the code means, i was trying to find out where the sensor/sender was,looks like i will have to ring a dealer I`ve asked on the ToG but no joy there either, may be we should stick to "spotted"

[T88CAN]

Had the bonnet off tonight to try and repair the wiring
the sender is on the offside lower part of the oil tank
the wires have come out of the sender and as they were held in with sylicon there is no way they will go back in so it`s another thing to go on the list of faults for the boys back at Blackpool