Cerb Catalyst Flange Source??
Discussion
Quick one..
Does anyone have a source for the catalyst to exhaust flanges for a Cerb. I am in the process of making an exhaust for my Chimaera that allows me to bolt in and out the Cats from my Cerb.
Had a trawl around the skip in the local worst place but nothing matched properly.
Cheers,
Matt
Does anyone have a source for the catalyst to exhaust flanges for a Cerb. I am in the process of making an exhaust for my Chimaera that allows me to bolt in and out the Cats from my Cerb.
Had a trawl around the skip in the local worst place but nothing matched properly.
Cheers,
Matt
Basically I have turbos on the Chim so want to install a CAT for MOT time, I have a spare exhaust which I am modding so this is for MOT only. From my rough measurements they will fit in a similar position to the Cerbs.
My previous attempt used a single Cerb CAT with one of the two pipes blocked at the end just for the MOT - I could not get it to pass emissions despite fiddling around with the map (Having said that I have learned a bit more about mapping since then).
Unfortunately I can't cut and shut the cats as I need them for MOT time for the Cerb. I'll see if I can find decat pipes, good shout there!
Matt
My previous attempt used a single Cerb CAT with one of the two pipes blocked at the end just for the MOT - I could not get it to pass emissions despite fiddling around with the map (Having said that I have learned a bit more about mapping since then).
Unfortunately I can't cut and shut the cats as I need them for MOT time for the Cerb. I'll see if I can find decat pipes, good shout there!
Matt
Gassing Station | Cerbera | Top of Page | What's New | My Stuff