Discussion
Hi all
My 4.2 has had the cooling mod and the fans kick in around 75, or so I thought, but actually when checking only the drivers on kicks in. I tried to get the car up to a higher temp (car was on axles stands trying to fix exhaust rattles) but it wouldn't go much higher before I had to put it back in the garage.
Would the other rad (which looks like it has bigger fins) kick in at a higher temp or is something broken?
If it is broken, what is the first thing I should look for?
Thanks in advance.
J
My 4.2 has had the cooling mod and the fans kick in around 75, or so I thought, but actually when checking only the drivers on kicks in. I tried to get the car up to a higher temp (car was on axles stands trying to fix exhaust rattles) but it wouldn't go much higher before I had to put it back in the garage.
Would the other rad (which looks like it has bigger fins) kick in at a higher temp or is something broken?
If it is broken, what is the first thing I should look for?
Thanks in advance.
J
So I have finally got around to changing the dead fan on the cerb and after removing the airbox and F1 panel, I stupidly assumed that removing the 2x bolts on the top of the fan cowling would allow me to pull the fan out, but it seems not.
Do I really have to drain down the system and remove the rad to replace the fan, or is there sneaky way to remove it that I don't know?
Do I really have to drain down the system and remove the rad to replace the fan, or is there sneaky way to remove it that I don't know?
Edited by OutlawFlat4 on Friday 31st October 18:49
Edited by OutlawFlat4 on Friday 31st October 18:55
Gassing Station | Cerbera | Top of Page | What's New | My Stuff