Driver's door not latching
Discussion
The latch on my drivers door is not auto-latching and even manually latching it with a screw driver doesn't get it to 'lock' - it just falls open again
Pressing the door open button gives multiple clicking as normal, and I can hear the solenoid (?) clicking, but not the latch in the door clicking
The passenger side is all fine, and both clicking on release
Anyone fixed their's before - was wondering if there was a fuse for either side door perhaps, and/or is there a cable that goes from the solenoid (which sounds like it is front mounted) to the latch that might have broken?
All thoughts much appreciated (and I have videos if they would help)
Pressing the door open button gives multiple clicking as normal, and I can hear the solenoid (?) clicking, but not the latch in the door clicking
The passenger side is all fine, and both clicking on release
Anyone fixed their's before - was wondering if there was a fuse for either side door perhaps, and/or is there a cable that goes from the solenoid (which sounds like it is front mounted) to the latch that might have broken?
All thoughts much appreciated (and I have videos if they would help)
Edited by Juddder on Monday 17th October 13:54
TwinKam said:
Think this is a mechanical problem, not an electrical one; probably a broken spring on the pawl that locks the rotating latch part. That or the pawl has seized on its pivot.
Either way, I have a feeling you'll need to remove the latch from the body.
Thanks, and thinking about it I think you're right as the door normally latches shut even if the battery is disconnected (*I'm sure we've all found that out the hard way...)Either way, I have a feeling you'll need to remove the latch from the body.
The replacement is listed as a Vauxhall Astra
http://www.alexjudd.com/cerbera/parts/#Door%20Catc...
Anyone replaced one or know from which year or model of Astra it might be from and how to get the existing one out?
There's a few different types on ye-old-eBay and I'm guessing it's from the back side panel some how
Thanks
ukkid35 said:
Hi Alex, you might find this thread relevant, or perhaps not
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Thanks Paul - much appreciated as ever - and hope you are well http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I'm going to try and look at the lock tonight, lovely weather depending, and then should have a good idea of which part isn't latching - will feedback when I do
Tarmacshredder said:
If you pull the carpet inspection panel that covers the door lock and check if the springs are intact that are on the arms on the outside of the door lock. I took the spring off, bent the end and refitted and still working fine now
ClassiChimi said:
Here's the l/h door mech off my Chimaera, hope this helps
Perfect - looks like typical mad TVR setup with the latch release being pressed by a solenoid bolted on with some custom panel, and a bunch of wiring that came out of which ever loom they had to hand Many thanks both and very much appreciated - I will report back after more diagnoistics in the daylight at the weekend!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff