Bola 18" replica spider wheels

[BuzzBillsberry]

I believe one of you Cerbera chaps have fitted a set of the above and there's a picky on the Cerb face book page...I sent a request to join the site about 4 days ago but had no response...any of one know of the car?

Cheers

Buzz

[BuzzBillsberry]

The bolas are much stronger than the chocolate spiders which are renouned for buckling. I've been waiting for the bola supplier to come back to me with the correct off sets for th Tamora 33/40mm etc which they haven't But they're a little off and as mentioned in a previous post with the bola configuration....as mentioned they aren't specifically a replacement just a stronger similar wheel to the poor quality spider...hey ho the search continues...... Thanks for all the input guys even though I have a Tamora my absolute all time favourite TVR is the Cerbera...its just not a convertible



Buzz

[BuzzBillsberry]

aide said:

Would a 225 40 18 compensate?
or a 235 35 18?

Not sure on the Cerbera but the 225/40 work on my Tam

Buzz

[BuzzBillsberry]

mk1fan said:

BuzzBillsberry said:

The bolas are much stronger than the chocolate spiders which are renouned for buckling. I've been waiting for the bola supplier to come back to me with the correct off sets for th Tamora 33/40mm etc which they haven't But they're a little off and as mentioned in a previous post with the bola configuration....as mentioned they aren't specifically a replacement just a stronger similar wheel to the poor quality spider...hey ho the search continues...... Thanks for all the input guys even though I have a Tamora my absolute all time favourite TVR is the Cerbera...its just not a convertible



Buzz

These were the wheels I referred to in the other thread.

Are you going 8-inch wide at the front? If you're going 8.5 then a tweak to the offset would be needed no?

225/40/18 or 205/50/16 all round on my Tamora.

Already on 225/40 R1Rs I raised the front suspension initially then refabed the F/R inner aches... the rears because I was running 255/35 R1Rs thendropped the suspension on the front back down t factory ride heights and got TvR in Clitheroe to do the geo. now there's no rubbing and the car is handle as spec.

Buzz