Equivalent Part Numbers
Discussion
As a new Cerb owner I am keen to start compiling a list of equivalent part numbers. I know the Cerbera is the first TVR to run an in-house manufactured engine, but there must have been a fair bit of parts bin raiding, especially the more mundane consumable items, like filters, belts, bulbs etc. I have done a search but have not come up with much so not sure if anyone has done this before?
In fact does anyone know any part numbers for the belts on early 4.2 fitted with aircon, TVR and any alternative manufatureres part nos?
See list so far at:
[urlwww.tvr-cerbera.fsnet.co.uk/parts.htm[/url]
>> Edited by spartacus on Tuesday 14th June 12:43
>> Edited by spartacus on Wednesday 15th June 15:58
In fact does anyone know any part numbers for the belts on early 4.2 fitted with aircon, TVR and any alternative manufatureres part nos?
See list so far at:
[urlwww.tvr-cerbera.fsnet.co.uk/parts.htm[/url]
>> Edited by spartacus on Tuesday 14th June 12:43
>> Edited by spartacus on Wednesday 15th June 15:58
Julian64 said:
Possibly the most important thread since jools et al took a pair of scissors to the inlet trumpets, or Mark decided lucas was a bit weedy.
But I fear people run out of puff with this sort of thread. I've seen a few start but they don't seem to go far.
Point taken Julian, I'm willing to tabulate whatever people can come up with, even if its not much, anything you can source from Halfords or your local high street accessory shop has got to save a few bob and inconvenience in the long run!
For example, I could have sworn someone figured out the make and equivalent part number for the infamous starter motor, someone else in Australia was of the opinion that the AP clutch plate is same as C5 Corvette, these are gems worth knowing!
TooTall Paul said:
Ok quick update just fitted a nissan maxima starter and it works perfectly just make sure you get the 3.0 inj auto version 88 -94, See how long it lasts now !!!
>> Edited by TooTall Paul on Wednesday 29th June 16:56
Olly, I think you should get this on your table, especially as the man has done the hard grunt and found the right starter motor, fitted it and it works, tried and tested so to speak!
MAGNETIC SWITCH AT THE BOTTOM OF THE DOOR
>> Edited by spartacus on Friday 19th August 21:44
>> Edited by spartacus on Sunday 21st August 20:30
extra 300 driver said:
spartacus said:
Guys, I want to put this on Part Number thread.
So just to confirm I have read this correctly:
The part number is PTC 130/30 (is that original part number?)
RS stock number is 455-3744
This gives you the contact options of NC or NO, cerbera needs NC so discard NO.
brown wire = nc
green = no
white = common
>> Edited by spartacus on Friday 19th August 21:44
>> Edited by spartacus on Sunday 21st August 20:30
Gassing Station | Cerbera | Top of Page | What's New | My Stuff