Rover v8 ignition timing
Discussion
Hi there,
just recently upgraded my standard RV8 plenum to a custom made twin 2x 55 jenvey plenum that we have
fabbed up. engine is a 4.6 JE unit with different cams, heads, canems ecu and decat.
this is my current spark table :
as the engine gets more air now and the AFR gauge went from high 12s to mid 13s on WOT
gave it a little bit more fuel to bring it down to the high 12sx again.
question is now leave the ignition or further advance it to 29 or 30 or go down to 27 or 26 on WOT ?
just recently upgraded my standard RV8 plenum to a custom made twin 2x 55 jenvey plenum that we have
fabbed up. engine is a 4.6 JE unit with different cams, heads, canems ecu and decat.
this is my current spark table :
as the engine gets more air now and the AFR gauge went from high 12s to mid 13s on WOT
gave it a little bit more fuel to bring it down to the high 12sx again.
question is now leave the ignition or further advance it to 29 or 30 or go down to 27 or 26 on WOT ?
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff