Trying to trace david of pumaracing
Discussion
Pumaracing said:
I'm sure I can leave any chicken soup type questions to my protégés on here. Some of them are coming along quite nicely now
Anyhoo, what can I help with?
..nothing too exciting, CVH questions, pity your site is down as that was a good read..Anyhoo, what can I help with?
OK car has been laid up, I'm wanting to ensure good start up lubrication from the off, what would you recommend for the cam lobes themselves to ensure they stay in the shape that was intended prior to oil getting up there?
Do you [or anyone] know if there are any haynes manuals still going for these engines, mine came from a cvh 1598 carb XR2 C reg...
On the performance front, I don't think there's much more to be done, the head [the "proper semi hemi type] has been quite heavily worked, valve guides, ported etc, oh and it has also been skimmed itruns a kent cvh22 cam, moderately high lift, with about 4 deg of overlap, [cam timing is really important here it should still be set up right but who knows what the grease monkies have been up to, the vernier shouldn't have been touched since it was set up] I just want to get it running and check oil pressure, flow, get it warmed up properly and see where we are etc, etc..
cheers
Mo.
Thanks David.
Turn 7, yes thats what I intend to do thanks guys.
PS it's a cvhk 23 cam that fitted pretty wild for a hyd lifter-> 2.5k to 6.8k....290 duration..
Ref:
http://www.kentcams.com/product-details/112/Camsha...
Turn 7, yes thats what I intend to do thanks guys.
PS it's a cvhk 23 cam that fitted pretty wild for a hyd lifter-> 2.5k to 6.8k....290 duration..
Ref:
http://www.kentcams.com/product-details/112/Camsha...
Edited by Mojocvh on Thursday 3rd September 12:42
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff