Looking for a carburettor accelerator pump or something like
Discussion
I'm looking for a carburettor accelerator pump thats not attached to the carburettor, or can be cut off.
Or something I can turn into one that won't melt in petrol.
I want to play around with a pump and jets in my old fords carburettor, see if i can improve it a little. But I really want to keep it in date (ish) so that means modifying my current WWI aeroplane carburettor and not sticking on a webber.
Anyone have any ideas?
Or something I can turn into one that won't melt in petrol.
I want to play around with a pump and jets in my old fords carburettor, see if i can improve it a little. But I really want to keep it in date (ish) so that means modifying my current WWI aeroplane carburettor and not sticking on a webber.
Anyone have any ideas?
Max_Torque said:
I'd suggest trying to find a small lever type fuel pump, like this:
As it's designed for fuel, has the necessary one way valves etc.
You'll have to experiment with the lever actuation ratio, from a cam on the throttle shaft in order to deliver a suitable quantity of fuel to a suitable nozzle.
That would be perfect! As it's designed for fuel, has the necessary one way valves etc.
You'll have to experiment with the lever actuation ratio, from a cam on the throttle shaft in order to deliver a suitable quantity of fuel to a suitable nozzle.
What is it?
kev b said:
I might be way off course but could you adapt a girling brake or clutch master cylinder as fitted to minis and other classics?
What cc and horsepower is your engine? Some aero engined cars I have seen could use a watering can as an accelerator pump!
Its going to be too big for me, its only a 3.2 four pot. What cc and horsepower is your engine? Some aero engined cars I have seen could use a watering can as an accelerator pump!
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff