Oil and Intercooler mounting.

Oil and Intercooler mounting.

Author
Discussion

robemcdonald

Original Poster:

8,851 posts

197 months

Wednesday 16th January 2008
quotequote all
Hi. This is my first post in this forum, hopefully you can help.

Anyway I'm sure someone here will be able to answer this easily;
Is there a limit to the distance the intercooler can be from the engine. For example could a mid engine turbo or supercharged car have a front mounted intercooler?
Same question, but for an oil cooler.

Sorry if it seems a stupid question.

robemcdonald

Original Poster:

8,851 posts

197 months

Wednesday 16th January 2008
quotequote all
GreenV8S said:
The rear/mid-engined case is often used as an example of where it would be sensible to use an air/water/air charge cooler rather than direct air/air. Long induction runs increase the volume that has to be compressed before you achieve boost, which can make a big difference to the amount of turbo lag.

No fundamental problem with long oil hoses but the longer the hose the more pressure you will lose due to drag, to offset this you would need to increase the hose bore.
Thanks for the reply.

Do you think it would be fair to say that any cooling benefit you would get from mounting the oil cooler at the front is out-weighed by the increase in oil pressure required?

robemcdonald

Original Poster:

8,851 posts

197 months

Wednesday 16th January 2008
quotequote all
I was just weighing up the benefits and weaknesses of the alternatives. I think it's pretty clear there are no real advantage in locating either item remotely.
I don't know too much about charge cooling either, so a bit more research is required before I can ask any meaningful questions.
Thanks very much for the help.