Positioning turbo charger

[cabs]

I am half way through a project and have encountered a problem mounting a turbo. Due to a lack of space the only way to position the turbo is at a slight angle with the compressor higher than the turbine. I was wondering if this would cause any problems with the oil feed and return? The oil return pipe is roughly 25 degrees off verticle, will I encounter any problems with the oil laying in the bearing and working its way into the exhaust turbine?

Any thoughts greatly received.

[cabs]

Thanks for the info. The whole unit will be at a sight angle, but looking at the oil return pipe there is a slight angle feeding into the pipe so oil wil hopefully drain away and not pool to much.