Cheap stainless shorty headers

[ArnieVXR]

So my cheap headers have arrived. Time will tell if they fit without modification. Total cost:
£180.37 + £55.29 P&P and £40(odd) duty






The stainless cat pipes cost £219.99 off eBay. I'll be adding a pair of stainless 200-cell cats before having it bolted on to the stainless cat-back I also sourced from eBay.

I'm now thinking about ordering some long-tubes to see what it would take to modify them for right hand drive.

Edited by ArnieVXR on Monday 1st September 19:48

[ArnieVXR]

These are small and won't maximize performance. That's by design. I wanted shine equivalents of the 2004 VXR headers. I ended up with a end to end stainless system for under 800 notes. hoping the system will match a stock VXR setup.

[ArnieVXR]

Collector is 3.5-inches wide reducing to a 2-inch outlet. It is 3.25-inches long.

[ArnieVXR]

It's only two inches because of the need to mate with a stock sized cat pipe. If you removed the last half inch it opens to just under three inches.