Monaro Key Programing

[the_ferret82]

1.Turn the ignition to ON, then wait 10 minutes for the next step in the programming sequence.
2.After the 10 minutes has elapsed, the car horn will chirp once. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
3.Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp twice. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
4.Leave the key to the ON position for 10 minutes. After the 10 minutes has elapsed, the car horn will chirp 3 times.
5.Verify that the security indicator in the instrument cluster has stopped flashing and attempt to start the vehicle.
6.Turn the ignition to OFF and remove the key from the ignition switch.
7.Move approximately 3 meters (10 ft) away from the vehicle and test the transmitter functions to validate that the transmitter has been programmed successfully.

thanks to Granby for finding this info

Edited by the_ferret82 on Thursday 3rd June 17:16

[the_ferret82]

boggie said:

Just a thought: Is it wise to post this info on a public forum? If a thief were to buy a key and simply tow your car away, would they be able to programme a blank key to the car?

they would need an original to disable the alarm etc first.