Discussion
my new diff doesnt have the abs ring on the output shaft, so speed sensor cant work. does anyone have a wiring diagram for the speed sensor, or know what type it is?
is the dash speed adjustable if i use a different sensor in the gearbox for example? I have a 2 wire speed sensor in the gearbox so could use that is its suitable....
do the later t cars all have a diff mounted sensor, or are some gearbox mounted?
is the dash speed adjustable if i use a different sensor in the gearbox for example? I have a 2 wire speed sensor in the gearbox so could use that is its suitable....
do the later t cars all have a diff mounted sensor, or are some gearbox mounted?
the lads at work machined a boss to thread the old speedo sensor into, which mounts in the 6060. with a 3.07 it reads about 4% too high , but it can be recalibrated in the dash ecu (its close enough not to bother--reads 90 at 85)
i spoke to paul smith, who said the that sensors tvr used varied in calibration for different sensors, so it would be better to stick with the sensor i had than try to swap.
i did have a speedo convertor that should have worked, but i could never get it to work with the TVR dash.
i spoke to paul smith, who said the that sensors tvr used varied in calibration for different sensors, so it would be better to stick with the sensor i had than try to swap.
i did have a speedo convertor that should have worked, but i could never get it to work with the TVR dash.
Edited by SteveSPG on Sunday 12th October 15:53
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff