Dzus fasteners
Discussion
I need some Dzus fasteners for the track bike.
I have some "receptacles" if you will, but I need the studs that slot into these.
I've measured the smallest OD of these and its 6mm, this is the end that's ridged, im assuming for a quarter turn seating purpose.
can people advise just what I need, I realise this might be a bit retarded but I found them very hard to find info online.
I have some "receptacles" if you will, but I need the studs that slot into these.
I've measured the smallest OD of these and its 6mm, this is the end that's ridged, im assuming for a quarter turn seating purpose.
can people advise just what I need, I realise this might be a bit retarded but I found them very hard to find info online.
George29 said:
moanthebairns said:
so I have the clip on style. I assume the other rivet on style is for brackets and such....
I'm guessing they are all a universal style with varying head sizes and bolt lengths.
Yeah that's about it. The actual fastener is the same for both, the only difference is how you fasten the bracket on. I have the rivet ones. I'm guessing they are all a universal style with varying head sizes and bolt lengths.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff