Help - Clutch slipping on Fazer 600 1998
Discussion
Hi all,
little help needed or some opinons on this: from cold at 30mph the clutch slips at about 5000 rpm in 3rd.
Is it possible that this is just the clutch springs gone soft or the cable needing some adjustment? Or is the clutch dead already? If it's just the springs is that DIY'able for a relatively inept rider (changed the Final Stage Resistor in my e46 but that's probably the most techinical thing I've done for a while!)?
For reference the bike is a well maintained '98 Fazer FZS 600 with 21k miles on the clock.
Thanks in advance
little help needed or some opinons on this: from cold at 30mph the clutch slips at about 5000 rpm in 3rd.
Is it possible that this is just the clutch springs gone soft or the cable needing some adjustment? Or is the clutch dead already? If it's just the springs is that DIY'able for a relatively inept rider (changed the Final Stage Resistor in my e46 but that's probably the most techinical thing I've done for a while!)?
For reference the bike is a well maintained '98 Fazer FZS 600 with 21k miles on the clock.
Thanks in advance
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff