Early dash, warning lights not working
Discussion
The warning lights for brake fluid, handbrake, MIL dont work, I seem to either have earth or ignition live across each bulb, non have a live and earth??? Should any of these turn on when I turn the ignition on?
None of these have worked while Ive owned the Chim and I know the handbrake one will never work till I replace the switch as I noticed last week when the exhaust was off that the centre is missing from the switch!
I also noticed when I pulled the lower panel out today that 2 wires are not connected and I have 2 spare terminals on the centre dip beam switch is this normal or should I connect them up as everything works with the lights. One is blue/red and the other white/red
Any help or ideas appreciated
Mike
None of these have worked while Ive owned the Chim and I know the handbrake one will never work till I replace the switch as I noticed last week when the exhaust was off that the centre is missing from the switch!
I also noticed when I pulled the lower panel out today that 2 wires are not connected and I have 2 spare terminals on the centre dip beam switch is this normal or should I connect them up as everything works with the lights. One is blue/red and the other white/red
Any help or ideas appreciated
Mike
Well after much searching I seemed to have found a couple of other people have found 2 spades disconnected while the lights still work ok so that might now just be TVR wiring!
Would still like to know though if any of the lower dash warning lights should come on when you turn the IGN on???
Or a picture of others wiring to the warning lights incase somebody has connected them up wrong in the past???
Mike
Would still like to know though if any of the lower dash warning lights should come on when you turn the IGN on???
Or a picture of others wiring to the warning lights incase somebody has connected them up wrong in the past???
Mike
Gassing Station | Chimaera | Top of Page | What's New | My Stuff