Look at picture please,upper balljoint spacers
Discussion
Just getting to final stages,should be putting the body back on following outrigger replacement.Can anyone comment on the 3mm spacers that I have fitted either side of the new upper ball joint. I have a dim memory of one large spacer when I removed the original ball joint but cant find the photo I took,despite trawling the internet cant find a photo that shows clearly if I have assembled correctly with a 3mm spacer either side of the ball joint or if it needs both spacers on one side of the balljoint. Can anyone clarify for me please? It will be a darn site easier to rectify now before the body goes back on.
Cheers Paul.
Cheers Paul.
Thanks very much everyone for replying,nothing is ever straight forward is it? Ideally I should have both spacers to the front but because of the size of the ball joint if I do that I wont get the camber adjustment I need without filing bits off my freshly powdercoated wishbones. Brill.
Cheers Paul.
Cheers Paul.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff