J E alternator bracket

[jojackson4]

One should be landing this week but what's the length of belt serpentine no a/c but power steering
Thanks in advance

[jojackson4]

No banana going on mine

[jojackson4]

Top job thanks gents

[jojackson4]

Not much in it

[jojackson4]

Pupp said:

You can't lose the tensioner, the belt will vibrate without it...

[jojackson4]

Yes

[jojackson4]

Pupp said:

And endless amusement deciding how to fit it...

Hopefully on the floor if every thing go's to plan

[jojackson4]

Chuffmeister said:

SILICONEKID345HP said:

If someone like ACT sold this product it would come with every nut bolt and washer and full illustrated instructions .

Remove old belt
Undo cables to rear of alternator
Remove bolts holding alternator to tensioner and then alternator
Remove tensioner pulley
Fit JE alternator bracket with supplied screw-bolts
Refit alternator
Reconnect cables
Fit banana to bolt on water pump
Fit nut and bolt through alternator and banana bracket
Fit 1585/ 1590 belt
Tension and tighten bolt and nut to banana bracket.

Don't forget to disconnect the battery first

[jojackson4]

Sardonicus said:

Chuffmeister said:

I don't think I did Jo TBH.

No need really, the MM/Serp alternator should be fitted with a cover over the terminal plate at the rear so no chance of grounding anything out IIRC

Yes it has a cover but only clips on and falls off very easily

[jojackson4]

[jojackson4]

[jojackson4]