supercharger drive for preserp chim

[Engineer1949]

as the title just thought you folks would like to see the wheel and adjuster i make for the pre serp engines to allow the fitting off the scpower blowers

john

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

[Engineer1949]

the grade is T6 which can be anodised but is highly resistant to corrosion and i do use a single tool i grind them up from a brazed on tip of a boring bar you need a good magnifying glass to get it right, you can buy chasers but in my experience really only any good on a modern c and c machine.


john

[Engineer1949]

here are the finished articles

john

Untitled by brundallmotorsport, on Flickr

Untitled by brundallmotorsport, on Flickr

[Engineer1949]

I have and an old friend off mine who has a gear hobbing machine just need the time to sort the design.

John