Pulling to the left

[SILICONEKID345HP]

Advice please , after being checked through from bushes to geometry I have no answer .The car drifts to the left sharply and is aditated by bumps in the road.The weight of my hands stops this but if i let go for a split second the car shoots to the left . Can anyone healp me ? Full concentration is needed or it can drift in to another lane.

Uprated front tubular wishbones are fitted , just wondering this could have something to do with it .

Edited by SILICONEKID345HP on Monday 2nd May 21:43

Edited by SILICONEKID345HP on Monday 2nd May 21:44

[SILICONEKID345HP]

Thanks for the offer , i may not have time tomorrow.

I even got a laser level across the center of the wheels each side and then measured , both sides are within 2 mm. I was thinking maybe the front passenger wheel sits further forward than the other side causeing it to pull over.

[SILICONEKID345HP]

Its all been checked through .

Edited by SILICONEKID345HP on Tuesday 3rd May 12:32

[SILICONEKID345HP]

I tested it on a country road ,more a track at 25 mph it sat in a perfect straight line even on a bumpy surface .

I even drove on opposite side of the road at 50 mph with the road camber o pposit ,the car still shot to the left .

[SILICONEKID345HP]

Tyre prssures 22 24 , ride height 130 145. All poly bushed .

[SILICONEKID345HP]

Sardonicus said:

Trouble is once the tyres have been running with that error they form their own shape which makes the pull progressively worse as you rack up the miles, this is why tracking/wheel toe alignment to rectify a pull on say a euro box seldom helps till the tyres are renewed Daz

Tyres are new ,Ive had the problem for years ,need to get it sorted.

[SILICONEKID345HP]

What is my next move .

[SILICONEKID345HP]

I have two sets of wheels , nothing changes. If I go on the wrong side of the road it still shoots to the left .That is against the camber.

Edited by SILICONEKID345HP on Tuesday 3rd May 21:14

[SILICONEKID345HP]

Thanks for your help ,the geo was done by a specialist then checked recently by another TVR specialist with laser equiptment and it1s bob on.

I`m thinking worst scenario a twisted chassis.

[SILICONEKID345HP]

Thanks. If I take the tension off the spring will it lower the ride height ?

[SILICONEKID345HP]

Apart from some cosmetics the car is solid with a good engine ,if I can get this sorted it will be the icing on the cake.

Edited by SILICONEKID345HP on Thursday 5th May 20:55

[SILICONEKID345HP]

Are you available Sunday Anthony