Leaking exhaust flexy

[SILICONEKID345HP]

I have two large holes in the flex , is there a grind off bolt on solution ? Those avertised on fleabay will fouling the chassis.

[SILICONEKID345HP]

Done the sports exhaust thing , combined with full decat it was crazy loud .

I had a flexy welded in arpund three years ago ,its now let go .Im wondering if it needs to be flexi , there seems to be engine movement when on the engine dyno at v8 d .

[SILICONEKID345HP]

SILICONEKID345HP said:

Done the sports exhaust thing , combined with full decat it was crazy loud .

I had a flexy welded in around three years ago ,its now let go .Im wondering if it needs to be flexi , there seemed to be engine movement when on the engine dyno at v8 d .

[SILICONEKID345HP]

jojackson4 said:

There is some weld on ones on the bay
Also some bolt on job I have the bolt on one with the clamps turned as close as possible
No problems
If you go weld on the lot has to come off

I want to bolt on , do you know the outside dimeter and do you have a link .?

Is it difficult to drop the exhaust without a lift ?

[SILICONEKID345HP]

I took the car to smart cars today , reckons a piece of solid pipe would do the job .

Any thoughts ? my other exhaust did not have a flex and did not give me any problems .

It would stop any future repairs .