POR15 vs Rust Bullet

[BrianT]

I know the chassis debates are continuing but just one question regarding these. Has anyone had any experience of "Rust Bullet"? This is an American product which claims to be better than POR15 on their website. I have not used either of them but intend to do some chassis painting soon. Rust bullet suppliers in the UK are at

Highfield House
Ipplepen Road
Marldon
Paignton
Devon
Tq3 1se

E-Mail: [e-mail]

Tel: [phone] Mobile [phone]

Unfortunately the two people who run this are out of the country until 29th October.

[BrianT]

Thanks a lot guys. Always good to get a few opinions. Some of you have had to do some drastic work. Mine is initially going to be a scrape off and paint as much as I can as a preventative measure for the future and some peace of mind. I hope there is nothing waiting to bite me in the arse but who knows. I have access to a four post lift and can keep it on there for possibly a week, leaving time for it to dry out before scraping off etc. I use the car everyday so a week off is all I can afford. Thanks again.

[BrianT]

Finaly finished the chassis strip, marine-clean, metal-ready, POR15-paint & Waxoyl . Decided to use POR15 as the rust bullet people didn't get back to me. If POR15 is as good on the chassis as it is on you hands I'll be well pleased, I just cannot get it off! The chassis turned out to be in very good order with only slight work needed especially to the two rails tucked under the sills, good for a 1997 Chimaera . Thanks to all for your contributions. Brian