Audi Auto Stop/Start

Author
Discussion

Skier

Original Poster:

485 posts

224 months

Monday 13th April 2015
quotequote all
Ok, this is driving me insane. Does anyone know anyone who can permanently disable this system or make it so that the dash switch to disable it is permanently engaged?

Skier

Original Poster:

485 posts

224 months

Monday 13th April 2015
quotequote all
I was really looking for definitive answers rather than probables; there isn't an option in VCDS. I don't like it as it's bloody irritating and the negligible fuel saving (so manufacturers can claim unrealistic mpg and gCO2/km) but I have to pay for excess wear on the starter motor and battery.

Skier

Original Poster:

485 posts

224 months

Tuesday 14th April 2015
quotequote all
The car I'm looking to disable it on is an A4 Avant 3.0 TDI Quattro S-Line. Superb car but this feature really does irritate me. I've done a great deal of Googling and not found a solution yet.

Skier

Original Poster:

485 posts

224 months

Tuesday 14th April 2015
quotequote all
There's a button on the dash to disable the Auto Stop/Start but I'm looking to permanently disable it. It's interesting but I have no issue with the electronic handbrake; it works well for me.

In May I'm having the ECU remapped by MDM Technik in Marlow and have asked if they can look into disabling the Auto Stop/Start whilst they're at it. Here's hoping!

Skier

Original Poster:

485 posts

224 months

Thursday 16th April 2015
quotequote all
From what I read on Audi-Sport.net this was possible in older Audis but not on the newer ones. Can you point me to a post where someone is reporting that they have successfully achieved this? Many thanks.

Skier

Original Poster:

485 posts

224 months

Monday 2nd November 2015
quotequote all
For anyone interested I've just received the following:

Gentlemen, I have done following changes trough VCDS yesterday and I can confirm Start/Stop is disabled every time I start the engine. "LED light stays ON" Thanks to audiinut.

- Go to Module 09-Cent. Elec.
- Enter Security Code (shown up by default) (mine was 20113)
- Go to Adaptation, Type Channel 34 and hit Read button, it should show the factory default number in value window.
- Subtract 4 from factory default number/value to disable Start&Stop every time engine is started. "Worked for my car"
- Add 32 to the factory default number/value it remember last status "This did not work on my car, but you can try"
- Test & Save