Calling all VCDS users

Author
Discussion

Ray Singh

Original Poster:

3,048 posts

231 months

Friday 30th September 2016
quotequote all
Ok, Im a bit behind the times, but I have managed to get VCDS running and have read out my Audi cars computers.

My 52 plate A4 (daily workhorse 163k miles) is showing some errors:

Address 01: Engine Labels: 038-906-019-AVF.lbl
Part No: 038 906 019 JQ
Component: 1,9l R4 EDC 0000SG 1570
Coding: 00002
Shop #: WSC 63351
VCID: 6FEA64902D0D773A47-4B1A
WAUZZZ8E43A134989 AUZ6Z0B0193990

2 Faults Found:
17994 - Engine Mount Solenoid Valves (N144/N145)
P1586 - 35-10 - Short to Plus - Intermittent
17978 - Engine Start Blocked by Immobilizer
P1570 - 35-10 - - Intermittent
Readiness: 0 0 X X X

Address 08: Auto HVAC Labels: 8E0-820-043.lbl
Part No: 8E0 820 043 H
Component: A4 Klimaautomat 1016
Coding: 00000
Shop #: WSC 63351
VCID: 264441B4C2777672F4-517C

2 Faults Found:
01809 - Actuating Motor for Temperature Flap; Left (V158)
41-10 - Blocked or No Voltage - Intermittent
01810 - Actuating Motor for Temperature Flap; Right (V159)
41-10 - Blocked or No Voltage - Intermittent

Address 46: Central Conv. Labels: 8E0-959-433-MIN.lbl
Part No: 8E0 959 433 BD
Component: Komfortgerát TBF 1110
Coding: 06859
Shop #: WSC 63351
VCID: 74E06BFC442B54E2BA-4B1A

Subsystem 1 - Part No: 8E2959802B
Component: Tõrsteuer.FS BRM 0002

Subsystem 2 - Part No: 8E2959801B
Component: Tõrsteuer.BF BRM 0002

5 Faults Found:
01134 - Alarm Horn (H12)
49-00 - No Communications
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01369 - Alarm triggered by Hood Switch
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -
01373 - Alarm triggered by Radio Ground Contact
35-00 - -

Any idea what these mean and more importantly how to rectify?

I feel like James Bond reading these out in my car - sad - but thats how i roll.



Ray Singh

Original Poster:

3,048 posts

231 months

Saturday 1st October 2016
quotequote all
Thanks - I cleared them all (i think) by pressing the 'clear all dtc's and then ran the auto scan function again. This is what was bought up. Is this correct?

Ray Singh

Original Poster:

3,048 posts

231 months

Monday 3rd October 2016
quotequote all
I am playing with version 16.8.2 and realised that it was best to go back to the OBD menu and then reset from here.

Its a good tool, I even found a rpm and % WOT throttle percentage. Its a good peiece of kit.