Rocker Cover spacers
Discussion
When I replaced the cam in my Griff, I took the opportunity to replace the original Rover V8 rockers with Yella Terra rollers. Not included in the kit were spacers to raise the rocker covers as the rollers will strike the cover due to their extra height.
As a temporary measure I siliconed two rubber gaskets together until I found a better solution.
A friend and I got together and have created aluminium spacers which are water cut from aluminium sheet. They fit and work well.
Is there are a market for these?. I am unsure how many people change to roller rockers and therefore if it's worth considering going to the effort and making these available.
Not wanting to make megabucks..just in providing these to help in making the conversion more professional
As a temporary measure I siliconed two rubber gaskets together until I found a better solution.
A friend and I got together and have created aluminium spacers which are water cut from aluminium sheet. They fit and work well.
Is there are a market for these?. I am unsure how many people change to roller rockers and therefore if it's worth considering going to the effort and making these available.
Not wanting to make megabucks..just in providing these to help in making the conversion more professional
Gassing Station | Griffith | Top of Page | What's New | My Stuff