Alarm wiring circuit diagram,

[m.w.todd]

Hi, can anybody help by e.mailing me the alarm/ immob wiring info because its driving me barmy. There is no pattern to the problems i am having trying to start the car. Cranking but no pump prime, now wont crank either, plus no flashing red light now on the steering column. Tapped the fuel and Ecu relays also bashed under and above the dash,pressed the inertia reset button ( i think), cleaned the pump contacts. Took a direct supply off the battery to check the pump and it primed. Alarm sets and unsets ok as does the central locking. My problems seemed to start when i went to start the car with my CTEK trickle charger still switched on ( wifes fault) Batt was right on top charge and car would crank but no pump prime then problems developed as above. Also there seems to be numerous relays available as i will replace these too. Both bosch silver 1" square, 1 x 20amp, 1 x 30 amp any advice on part numbers or suppliers much appreciated. Many thanks for any help

Edited by m.w.todd on Monday 31st August 18:13

[m.w.todd]

yo. down on the starter motor area

[m.w.todd]

Looks like im in for a long weekend here but im in 2 minds as we have a spot on Auto Leccy 5 mins down the road and i think im in 2 minds as to just let him by-pass everything and install a new system. Thanks for the wiring info and will explore when i loosen the dash as i need it to run to get it there. Will keep all up to date so thanks again for all contributions

[m.w.todd]

All fuses checked Pete, in the fuse box area. Are there any hidden in the alarm itself? Relays all tapped and contacts cleaned but replacements arriving soon as a matter of start at the basics lol. Disconnected all power now to allow a fresh reset hopefully. Thanks