Pre verto flywheel - no alignment marks

[JTBUSH]

I'm putting a new clutch in my rebuilt 1293 along with fitting lightened flywheel and back plate. Only problem is, there are no timing marks or alignment marks to ensure its properly aligned for balance. There's not even one on the new diaphragm. It was assembled when I got it from the machine shop but I never checked for marks before taking apart as assumed they would be there. Do I need to go back to shop to get it assembled in correct orientation and marked up?

[JTBUSH]

Thanks.

Problem isn't so much timing, it's more the balance of components I'm concerned about as there are no dabs of paint, a marks or any other markings to show which orientation the flywheel/ backplate and diaphram should be.

[JTBUSH]

Thanks.

Problem isn't so much timing, it's more the balance of components I'm concerned about as there are no dabs of paint, a marks or any other markings to show which orientation the flywheel/ backplate and diaphram should be.