Discussion
I have a PC which has been causing me a lot of problems lately.
I can not put up the full cfg, but I will try
CPU- AMD Athlon (?) X4
RAM-8GB 1600 mhz (msi or corsair)
VGA- Radeon R7 2GB DDR5
Back like 4 months ago, started with giving random BSOD's for Atikdmag.sys but then I checked the VGA cable and it was half-burnt so fair enough I said. Now right after that it was giving me BSOD with error code 0x000003b and wouldn't finish it until I eventually bought a new HDD. With those sorted I had no worries up until like last week when at random gave me the 0x000003b error code again and just wouldn't start. When it did eventually I tried to find out what caused it but couldn't. I checked the tower, removed the SATA cable from the MoBo and reconected and everything was OK!. Please note that these problems occur only on startup, so when I need it, in fear that it won't start up I'll just put it on standby and then everything is just fine.
While just watching some youtube vids it died again giving me error code 0x0000003f like a couple of times and then 0x000003b until I have up on it.
I think the issue might be with the SATA cable, since the HDD is almost brand new and I still have like 10 months warranty on it, cables ordered, now just waiting, I don't need to use it until the weekend anyway. (I work 12 hrs on nights so I don't have the time). Hopefully when the new cables come, I'm just going to swap them install a O/S on it and everything should be spot on.
BUT what if this does not solve the issue? I have checked forums etc about the error code 0x0000003f but couldn't find anything usable. According to memtest86 my rams are fine. It just cracks me up, because this is my first so-so up to date computer and ever since I bought it(2nd hand) it just causes me headaches.
Any pro IT-hardware guys around?
I can not put up the full cfg, but I will try
CPU- AMD Athlon (?) X4
RAM-8GB 1600 mhz (msi or corsair)
VGA- Radeon R7 2GB DDR5
Back like 4 months ago, started with giving random BSOD's for Atikdmag.sys but then I checked the VGA cable and it was half-burnt so fair enough I said. Now right after that it was giving me BSOD with error code 0x000003b and wouldn't finish it until I eventually bought a new HDD. With those sorted I had no worries up until like last week when at random gave me the 0x000003b error code again and just wouldn't start. When it did eventually I tried to find out what caused it but couldn't. I checked the tower, removed the SATA cable from the MoBo and reconected and everything was OK!. Please note that these problems occur only on startup, so when I need it, in fear that it won't start up I'll just put it on standby and then everything is just fine.
While just watching some youtube vids it died again giving me error code 0x0000003f like a couple of times and then 0x000003b until I have up on it.
I think the issue might be with the SATA cable, since the HDD is almost brand new and I still have like 10 months warranty on it, cables ordered, now just waiting, I don't need to use it until the weekend anyway. (I work 12 hrs on nights so I don't have the time). Hopefully when the new cables come, I'm just going to swap them install a O/S on it and everything should be spot on.
BUT what if this does not solve the issue? I have checked forums etc about the error code 0x0000003f but couldn't find anything usable. According to memtest86 my rams are fine. It just cracks me up, because this is my first so-so up to date computer and ever since I bought it(2nd hand) it just causes me headaches.
Any pro IT-hardware guys around?
What I did so far is update the BIOS and all the drivers. The reason why I want a new OS is that It might be infected, because for some reason is really really slow. If the GPU is the issue, at least I have the reason to upgrade to an nvidia, ADM GPU's are cheap, but s
t 
Edited to add: I don't think the GPU is bad though, because it's been working perfectly ever since I changed the cables
t Edited to add: I don't think the GPU is bad though, because it's been working perfectly ever since I changed the cables
Edited by exelero on Tuesday 24th January 18:13
TonyRPH said:
Or you could just use Blue Screen View from Nirsoft.
Much easier.
Whether or not you'll understand it though...
I'll try this one. If I can not understand it than there is always Google and if Google can't help, I got Pistonheads. Much easier.
Whether or not you'll understand it though...
Btw when you turn on your pc after a crash usually a message pops up with the minidump.tmp, well I tried loads of times to copy the whole address of the minidump and then copy-pasted it in the cmd.exe but no results.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff