Ultima GTR body kit "Jon Olsson "RK1
Discussion
I have tried to contact Jon Olsson on his website but he has no contact information.
I have even called up ADV1 who did the rendering design for him but they said they only did the computer graphics not the actual bodywork.
Does anyone know where I can buy something like that or have it made?
http://www.youtube.com/watch?v=LMVEpl8btRQ&fea...
I want to get myself a full custom body. I have a friend who makes all carbon stuff. Obviously can do FRP too, but if I am going to do it, might as well do it right. He does a lot of work in the GT series here.
I want to make a set of body panels modeled around a Bentley Speed 8 or Toyota GT-ONE personally. That kind of style.
Anyway, cut a long story short. Estimated cost at the moment is between 30-40k AUD including modeling, molding, fabrication, fitting etc. That's an estimate after me asking "How much for a custom body?". So could be less, not a firm quote at this stage. Made from dry carbon too, so its going to be LIGHT. Obviously price goes down if it's not just a once off for me. Shipping international on top.
So if anyone else in interested in working on this project with me, I'm happy to collaborate with people to design a body together. Let me know via PM.
This is some example of my friends work.
Gallardo rear bar, dry carbon
Full carbon chassis and carbon body work
Mosler body parts in carbon
I want to make a set of body panels modeled around a Bentley Speed 8 or Toyota GT-ONE personally. That kind of style.
Anyway, cut a long story short. Estimated cost at the moment is between 30-40k AUD including modeling, molding, fabrication, fitting etc. That's an estimate after me asking "How much for a custom body?". So could be less, not a firm quote at this stage. Made from dry carbon too, so its going to be LIGHT. Obviously price goes down if it's not just a once off for me. Shipping international on top.
So if anyone else in interested in working on this project with me, I'm happy to collaborate with people to design a body together. Let me know via PM.
This is some example of my friends work.
Gallardo rear bar, dry carbon
Full carbon chassis and carbon body work
Mosler body parts in carbon
Edited by AlexCim on Tuesday 5th July 15:18
That carbon fiber looks good. Can he also do the carbon that has a gloss finish?
This is something I’m interested in but the price is out of my budget
. would the price go down if we had enough people together?
I mainly need more Air directed to the engine from the side scoops and from the top since my car will be operating in temperatures that can reach up 50C or 132F. Plus I will have turbos that need inter coolers and such. This is why I need a modified body so it’s more of as functional kit not one that is just for show.
This is something I’m interested in but the price is out of my budget
. would the price go down if we had enough people together? I mainly need more Air directed to the engine from the side scoops and from the top since my car will be operating in temperatures that can reach up 50C or 132F. Plus I will have turbos that need inter coolers and such. This is why I need a modified body so it’s more of as functional kit not one that is just for show.
Edited by suki2011 on Wednesday 6th July 20:30
suki2011 said:
That carbon fiber looks good. Can he also do the carbon that has a gloss finish?
This is something I’m interested in but the price is out of my budget. would the price go down if we had enough people together?
I mainly need more Air directed to the engine from the side scoops and from the top since my car will be operating in temperatures that can reach up 50C or 132F. Plus I will have turbos that need inter coolers and such. This is why I need a modified body so it’s more of as functional kit not one that is just for show.
Why would you want the 'gloss' carbon when he can do the 'matt' carbon This is something I’m interested in but the price is out of my budget
. would the price go down if we had enough people together? I mainly need more Air directed to the engine from the side scoops and from the top since my car will be operating in temperatures that can reach up 50C or 132F. Plus I will have turbos that need inter coolers and such. This is why I need a modified body so it’s more of as functional kit not one that is just for show.
Edited by suki2011 on Wednesday 6th July 20:30
AlexCim said:
I want to get myself a full custom body. I have a friend who makes all carbon stuff. Obviously can do FRP too, but if I am going to do it, might as well do it right. He does a lot of work in the GT series here.
I want to make a set of body panels modeled around a Bentley Speed 8 or Toyota GT-ONE personally. That kind of style.
Anyway, cut a long story short. Estimated cost at the moment is between 30-40k AUD including modeling, molding, fabrication, fitting etc. That's an estimate after me asking "How much for a custom body?". So could be less, not a firm quote at this stage. Made from dry carbon too, so its going to be LIGHT. Obviously price goes down if it's not just a once off for me. Shipping international on top.
So if anyone else in interested in working on this project with me, I'm happy to collaborate with people to design a body together. Let me know via PM.
This is some example of my friends work.
Gallardo rear bar, dry carbon
Full carbon chassis and carbon body work
Mosler body parts in carbon
If you want to make it look good. Like something crossed between the front on the racerx design and the front on an SL-C for instance I would be all over it. I want to make a set of body panels modeled around a Bentley Speed 8 or Toyota GT-ONE personally. That kind of style.
Anyway, cut a long story short. Estimated cost at the moment is between 30-40k AUD including modeling, molding, fabrication, fitting etc. That's an estimate after me asking "How much for a custom body?". So could be less, not a firm quote at this stage. Made from dry carbon too, so its going to be LIGHT. Obviously price goes down if it's not just a once off for me. Shipping international on top.
So if anyone else in interested in working on this project with me, I'm happy to collaborate with people to design a body together. Let me know via PM.
This is some example of my friends work.
Gallardo rear bar, dry carbon
Full carbon chassis and carbon body work
Mosler body parts in carbon
Edited by AlexCim on Tuesday 5th July 15:18
olsson99 said:
Hey,
I am more then happy to sell body parts, just e mail me on olsson99@gmail.com and I will get you all the info you need! I have both the moulds for the pic you showed and the latest widebody version...
/JON
Oh boy, I wish I could afford a set of Olsson panels for my Can Am build! (If indeed there is a Can Am option, LOL!)I am more then happy to sell body parts, just e mail me on olsson99@gmail.com and I will get you all the info you need! I have both the moulds for the pic you showed and the latest widebody version...
/JON
anyone who has driven an ultima of even modest height will already know that lowering the roof height as on the porker lookee-likee would be a nightmare, certainly wouldnt be able to wear a helmet in there. It also called for quite a few chassis mods to make it fit also. Jons development is far better looking anyway IMO.
Gassing Station | Ultima | Top of Page | What's New | My Stuff