|
tyinsky
Original Poster
438 posts
28 months
|
My car has a splitter fitted to it which I want to remove (blue car photo). What is the original style item that goes in its place (the black thing on the red car photo)? And can I get one anywhere other than a main dealer? Thanks.  
|
|
|
graemel
4,579 posts
86 months
|
The black thing you refer to is a two or three piece undertray. They extend back to the front of the wings and around the floor pan. Porsche OE I guess only
|
|
|
wildman0609
654 posts
45 months
|
normally the spliter is attached to the black plastic piece
|
|
|
freedman
4,075 posts
76 months
|
As above splitter is likely screwed over the top if the factory undertrays so possibly you just need to take it off Its two piece, and they come up on Ebay quite frequently Brand new here http://www.ebay.co.uk/itm/GENUINE-PORSCHE-964-FRON...Around half tehat price for S/H
|
|
|
tyinsky
Original Poster
438 posts
28 months
|
Thanks all. I looked under the car before it went dark - the original item must have been removed and then the splitter fitted.
With the two pieces in the eBay link above, is there also an additional centre section?
|
Advertisement
|
|
|
ras62
262 posts
25 months
|
The two plastic covers join in the middle but there is a small metal strip that connects two holes on each. I doubt yours will have been removed completely as that would expose rads etc to the road beneath.
|
|
|
tyinsky
Original Poster
438 posts
28 months
|
The original item has been removed completely as the splitter that has been fitted extends under the car as per the standard one. Looking at the way it is made it would not be able to fit over it.
|
|
|
tyinsky
Original Poster
438 posts
28 months
|
I took this off tonight - hoping I would find the original underneath but sadly it is not there. Will have to keep an eye out for a S/H one.
|
|
Gassing Station | Porsche | Porsche
What's New | My Stuff | Top of Page
