|
3Dee
Original Poster
2,544 posts
90 months
|
..well actually, on here would be better!
At some point on the not-too-distant future, I will need to have my project (LS7 with Mild cam) set up and tuned/ engine tested/ emmissions tested for IVA compliance, and I know it won't be easy! ...or so I hear...
So can you Guys come up with some suggestions and options on who is a top Bloke/ Bloke-ette (not to be sexist about it!) to use for this event?
I am in the Chelt/ Worcester area, so the closer the better naturally, but overall it is quality expertise I am looking for so distance is not the most important factor...
cheers
|
|
|
3Dee
Original Poster
2,544 posts
90 months
|
Bump!  Come on Guys - give an old man a much needed break! Ideas please! cheers
|
|
|
andy350z
4 posts
60 months
|
|
|
craig7l
829 posts
135 months
|
Advanced Motorsport and engineering silverstone got my ls3 376/480 IVAd and can't come recommended enough Also have a hub dyno dynapac used last week by the drayson electric LMP team, and used by numerous big players such as the Hennessy venom gt etc etc Www.advancedme.co.ukLately dan was the first to put a Gems X25 ECU on a ls V8 engine with drive-by-wire linked to a race technology dash with race logic t/c and also a custom built race spec wire harness Based in silverstone
|
|
|
Davrianman
444 posts
133 months
|
Pete Knight is a top engine builder. He specialises in LS engines too. I was exceptionally pleased with his work and he is a thoroughly nice chap too! Based in Daventry and has a full dyno. http://www.knightracingservices.co.uk/Mart
|
Advertisement
|
|
|
Ult-Jim
268 posts
59 months
|
Forum member Deadscoob is your man for that answer. His recently published post show a very hi spec car passing IVA.
Jim.
|
|
|
tjlees
396 posts
106 months
|
I used Paul at Wortec. He is the guy that GM uk turn to tune their engines. Excellent job and made sure the fueling was safe and removed my stalling. Hp scanner shows it all good to at least 140mph! Added bonus that idle and track temp keeps to 87-89c regardless. Also helped setup my afr gauge so I can spot any problems early.
Also tunes on the public road/track rather than a rolling road which IMHO is more realistic for the car
Contact Paul 07775934556
|
|
|
3Dee
Original Poster
2,544 posts
90 months
|
tjlees said: I used Paul at Wortec. He is the guy that GM uk turn to tune their engines. Excellent job and made sure the fueling was safe and removed my stalling. Hp scanner shows it all good to at least 140mph! Added bonus that idle and track temp keeps to 87-89c regardless. Also helped setup my afr gauge so I can spot any problems early.
Also tunes on the public road/track rather than a rolling road which IMHO is more realistic for the car
Contact Paul 07775934556 Where is he based Tim? Website does not say...which is surprising!
|
|
|
deadscoob
1,042 posts
129 months
|
If it hasn't passed iva he won't be able to do it on the road so itd be worth you hiring somewhere like Bruntingthorpe
|
|
|
tjlees
396 posts
106 months
|
3Dee said: Where is he based Tim? Website does not say...which is surprising! Yes not many details on the main website! He is based at Bosham Darling Lane nearish to Portmouth but he will travel to you for the tuning, since he does not need a rolling road. I left my car with him, since I also had a wiring problem on one of the sensors. Autobionics in York use him as well. Providing you have an hp scanner and feel confident, he can resolve minor problems remotely!
|
|
