Front speakers

Front speakers

Author
Discussion

Bigadz

Original Poster:

393 posts

149 months

Wednesday 11th July 2012
quotequote all
I'm looking to upgrade all of the sounds system, part of which is getting rid of the old burnt out pioneers. Ive been reading I need a shallow depth front speaker, but will these squeeze in the cutouts, if not perfectly can I still get away with these?

Vibe slick 6 coaxial. 6.5" /16.5cm

Mounting diameter : 143mm
Mounting depth: 44mm

http://audiovisualworld.co.uk/shopping/products.ph...

Thanks, Ad

camel_landy

4,924 posts

184 months

Wednesday 11th July 2012
quotequote all
Eh???

The Cerbera is its own sound system wink

M

Bigadz

Original Poster:

393 posts

149 months

Wednesday 11th July 2012
quotequote all
I know, I know, I'm not going mad, just good to be able to hear something at all when on a journey.

The main sound mod i made was decats wink

Bigadz

Original Poster:

393 posts

149 months

Thursday 12th July 2012
quotequote all
Any suggestions please guys, I know a lot of you have changed these. I would go and look on the car but I am away with work at the moment. Thanks

sweeper

323 posts

161 months

Thursday 12th July 2012
quotequote all

Bigadz

Original Poster:

393 posts

149 months

Thursday 12th July 2012
quotequote all
Yeah thanks, I have read through them already its just there is some conflicting info in there which I wanted to clear up.

Some people say the pioneers are 6.5" items yet the opening might only be around 125mm which is small for that speaker size?

I think the depth of these vibes is fine at 44mm but I was hoping that the mounting diameter of 143mm might also just about fit?

Juddder

845 posts

185 months

Sunday 21st October 2012
quotequote all
Bigadz said:
I'm looking to upgrade all of the sounds system, part of which is getting rid of the old burnt out pioneers. Ive been reading I need a shallow depth front speaker, but will these squeeze in the cutouts, if not perfectly can I still get away with these?

Vibe slick 6 coaxial. 6.5" /16.5cm

Mounting diameter : 143mm
Mounting depth: 44mm

http://audiovisualworld.co.uk/shopping/products.ph...

Thanks, Ad
Any one tried these out or have a recommendation on what to replace the OEM Pioneer ones with?

Not that I use the stereo, but I've just retrimmed the doors in black Alacantra and putting old, scratched and bashed up Pioneers back in seems a waste :-)

Judder

DCBT

20 posts

152 months

Sunday 21st October 2012
quotequote all
I've just fitted these based on recommendations and they were fine and sound great.

http://www.fusionelectronics.com/content/product_d...

I think the mounting diameter of the speakers that you are looking at may be too big without some door card modification

Hope this helps,

Juddder

845 posts

185 months

Sunday 21st October 2012
quotequote all
DCBT said:
I've just fitted these based on recommendations and they were fine and sound great.

http://www.fusionelectronics.com/content/product_d...

I think the mounting diameter of the speakers that you are looking at may be too big without some door card modification

Hope this helps,
Perfect!

Many thanks for the advice and recommendation - any preferred UK supplier you bought them from? smile

Thanks again

Judder

fubar sounds

207 posts

141 months

Monday 22nd October 2012
quotequote all
i put in alpine spr 60 , they dint fit flush and sound rubbish , highly not recommended.

bionicjim

473 posts

140 months

Monday 22nd October 2012
quotequote all
I went down the jl audio root the are 6.5 components
With 18mm spacers but because the doors are sealed I removed the panel right behind the speaker to alow it to breath
Then made a HUD out of dynomat fixed to the back of the door card leaving it open at the bottom
These speakers are very expenceive and they need an amp
But they are very very very good

DCBT

20 posts

152 months

Monday 22nd October 2012
quotequote all
Hi Judder,
I bought from this supplier

http://www.sextonsdirect.co.uk/fusion/p~CS-FR6020....

fubar sounds

207 posts

141 months

Tuesday 23rd October 2012
quotequote all
sextons wandsworth, built me a sub in to the egg space, seemed to do a reasonable job , quite expensive thou, i have a 8" jl 250w on a 600watt nano stream amp, seems pretty good, and i can unscrew it and put the egg back in no problem

fubar sounds

207 posts

141 months

Tuesday 23rd October 2012
quotequote all
when i was looking i was told vibe wasnt a good make , also those fusions are way to cheap, your not gonna get a decent sound for that price in such a noisy bassy car , take your car to sextons or call them and ask their advice, i m confident they would advise something that would be deserving of your supercar, i wish i had.

Juddder

845 posts

185 months

Wednesday 24th October 2012
quotequote all
Juddder said:
Many thanks for the advice and recommendation - any preferred UK supplier you bought them from? smile
£37.99 from incar_tech on eBay and delivered the next day.

Haven't wired them in yet but they look great (and look super slim) so should do the trick perfectly - thanks again smile

Dunc6001

99 posts

192 months

Wednesday 24th October 2012
quotequote all
Thanks Judder, be interested on your views of ease to fit and quality of sound? Keep us all posted?

D

wiggycerb

246 posts

195 months

Wednesday 24th October 2012
quotequote all
I had a rockford fosgate install about 9 years ago in mine, with a JL audio sub built into the helmet holder, still going strong and sounds great (when needed of course !)

If you need measurements let me know and ill pop one of the speakers out ?

Juddder

845 posts

185 months

Sunday 28th October 2012
quotequote all
Juddder said:
Any one tried these out or have a recommendation on what to replace the OEM Pioneer ones with?

Not that I use the stereo, but I've just retrimmed the doors in black Alacantra and putting old, scratched and bashed up Pioneers back in seems a waste :-)

Judder
Just to update that the Vibe slick 6 fit perfectly and look great (*my opinion but I've attached some shots).

The speakers have screw mounts for both 4 settings, and 3 settings (the same as the Cerbera doors) so I went for the 3 setting, used the same holes as the OEM Pioneer ones and didn't bother with the covers as the speakers look like top end audiophile ones in their standard green state ;-)

Also re-trimmed the whole door in Black Alcantara myself (not bad for someone who's never done this before) and the trick is to buy a can of spray adhesive (I used Ultratape Spray Adhesive) and spray the fibreglass pieces with it before putting on the newly cut-to-pattern pieces of material.

Anyway, a picture says a thousand words, so here's three of them smile






RPE11Y

982 posts

262 months

Sunday 28th October 2012
quotequote all
Juddder said:
Just to update that the Vibe slick 6 fit perfectly and look great (*my opinion but I've attached some shots).
How do they sound though??

tur8o

176 posts

200 months

Sunday 28th October 2012
quotequote all
the only poblem with notcovering them is u or a passenger will at some point put ur foot through them. mine has got some cheapy plastic fronted speakers that came with the car and i have accidently smashed the plastic parts to bits getting in and out over time. ur door cards do look great tho, time well spent.