|
magpies
Original Poster
1,144 posts
51 months
|
as title realy
although I have seen the odd photo showing the alternator high up on the drivers side I have not seen the mounting/adjusting arrangement
can someone shed some light please???????
|
|
|
v8s4me
1,500 posts
88 months
|
Good to see you are back on the project 
|
|
|
sarbec
303 posts
57 months
|
dont know if this helps i mounted mine low on my race car you can just about make it out 
|
|
|
sarbec
303 posts
57 months
|
By the way the alternators from a rover 75
|
|
|
magpies
Original Poster
1,144 posts
51 months
|
sorry but cannot see it!!
|
Advertisement
|
|
|
sarbec
303 posts
57 months
|
i will take a better photo tomorrow
|
|
|
Boosted LS1
13,451 posts
129 months
|
Are you up and running Ivor?
|
|
|
Alan Whitaker
703 posts
51 months
|
Hi Mick Its down on the left side.  . Might be tight to fit here with the rails so tight. Alan
|
|
|
Geoff38
355 posts
115 months
|
fitted like this in My taimar project ( done by previous owner with a chunk of box section steel....) 
|
|
|
sarbec
303 posts
57 months
|
Boosted LS1 said: Are you up and running Ivor? Hi Mike its with Jools at the moment need better injectors so were at a standstill at the mo have you any ?
|
|
|
techbotics
673 posts
51 months
|
Doesn't boost performance do a kit?
cheers D S3
|
|
|
Boosted LS1
13,451 posts
129 months
|
sarbec said: Hi Mike its with Jools at the moment need better injectors so were at a standstill at the mo have you any ? Sorry Ivor but I don't. You could put a post on Fordpower in the 24v section. There are some 400 hp projects on the go. Look for Ade 500, I built his engine and he's doing final mapping at Emerald shortly. Or, you could buy from here: http://www.rceng.com/They'll have something good and I've bought from them before.
|
|
|
Boosted LS1
13,451 posts
129 months
|
techbotics said: Doesn't boost performance do a kit?
cheers D S3 I used to but they became expensive and time consuming to produce.
|
|
