Login | Register
SearchMy Stuff
My ProfileMy PreferencesMy Mates RSS Feed
Reply to Topic
Author Discussion

jimed

Original Poster:

1,368 posts

93 months

[news] 
Monday 1st October 2012 quote quote all
There was a link to one of the above in a post a few weeks ago. It showed some fibreglass lay up and also the moulds being taken off (might have been a chim/cerb involved??) - much use of hammers/whatever for that. It included one of the guys I know who is now not well and it would be nice if he could see himself but I've looked and can't find it so can anyone help?

Jim

davep

628 posts

171 months

[news] 
Tuesday 2nd October 2012 quote quote all
Is this it? Good interview with Ned!

http://www.youtube.com/watch?v=votEb2z-MLI&fea...

jimed

Original Poster:

1,368 posts

93 months

[news] 
Tuesday 2nd October 2012 quote quote all
Not the one I'm afraid; thanks for trying though.
Jim

Transmitter Man

3,183 posts

111 months

[news] 
Thursday 4th October 2012 quote quote all
Jim,

How about this one: http://www.youtube.com/watch?v=t6oz388s26Q

Phil
A poor wedge owner

jimed

Original Poster:

1,368 posts

93 months

[news] 
Friday 5th October 2012 quote quote all
Thanks for the link Phil - I enjoyed the video particularly the bits with the SEAC in action - regrettably it isn't the right one. The one I'm after has stuff about fibreglass lay up and includes knocking the moulds off what I think was a chim body; I suspect it might have also involved a cerb somewhere but could have been wrong. I'm fairly sure the link was in a post a few weeks ago but I've searched and can't find it. At the time I sent the link to a friend who is ex factory but he had a PC issue and has lost the link - a mutual friend was seen knocking the moulds off the body and as he isn't well now it would be nice if he could see himself in his younger and better days so any other ideas appreciated.
Jima
Advertisement

V8 GRF

6,813 posts

97 months

[news] 
Friday 5th October 2012 quote quote all
I saw that as well. I've searched my YouTube viewing history and can't find it either, was it on YouTube or Vimeo?

LordGrover

22,910 posts

99 months

[news] 
Friday 5th October 2012 quote quote all
More than I expected to see with a google: EG?

V8 GRF

6,813 posts

97 months

[news] 
Friday 5th October 2012 quote quote all
LordGrover said:
More than I expected to see with a google: EG?
That's a good one but not the one.

It really just focussed on the glass fibre process, layup, mould bolting together and break apart afterwards.

catfishdb

102 posts

56 months

[news] 
Friday 5th October 2012 quote quote all
On Youtube:try searching

car body glass fibre by mister rolls

It runs for 3:10, posted 2 years ago

Arthur

jimed

Original Poster:

1,368 posts

93 months

[news] 
Friday 5th October 2012 quote quote all
Thanks Arthur - that's the one!
Jim
PS Don't know how to post the link here ... doh!
www.youtube.com/watch?v=eS_Sqnn2rlc -is the address
Reply to Topic