Rubber door to window seal

[Number 7]

Guy, any ideas for where I can get some new rubber trims that seal the door panels to the window please? looked in some of the usual places, but cant see anything that matches.

Thanks

[mrzigazaga]

Hi Mate...Have you tried these guys?...Ziga
http://www.google.co.uk/url?sa=t&rct=j&q=&...

[matt-man]

Woolies

I ordered all mine through them

[jindle]

I believe it's also possible to shift the window so it sits tighter to the seals. So u may need to do that too

[Number 7]

Looked at Woolies, but they didn't have it. Fortunately Seals Direct did (thanks Zig)so now ordered, although they didn't recognise the targa panel seals which I also need.

[mrzigazaga]

Number 7 said:

Looked at Woolies, but they didn't have it. Fortunately Seals Direct did (thanks Zig)so now ordered, although they didn't recognise the targa panel seals which I also need.

Hi mate..Glad it helped..I think the Targa seal is two pieces glued together...Ziga

[Rockettvr]

Paul - which profile did you use in the end? I had my offside window seal come off on the way home from the fest and the near side is non- original so I have nothing to compare to. Gonna replace both but can't identify what profile is correct
Thanks Ron

[jon haines]

As Zig says the targa seal is 2 pieces glued together. You can actually fit the ones from a griff or chim with a bit of fiddling they they work cos I have done it on mine.

[Number 7]

Rockettvr said:

Paul - which profile did you use in the end? I had my offside window seal come off on the way home from the fest and the near side is non- original so I have nothing to compare to. Gonna replace both but can't identify what profile is correct
Thanks Ron

Ron, the window seal is ETS3240 @ £4.36 per metre. Described as for a Mini quarterlight

[Rockettvr]

Many thanks Paul.

[Rockettvr]

Had a look at this last night and I'm not sure it's the one I'm after- this is it
I'm after one to fit the top of the door to the glass -
Thought it would look more like this-
As said got nothing to compare to as the other side is non original ( just a rubber strip) so any pointers welcome

[Number 7]

Sorry Ron, I completely misunderstood. The seal I refer to is that which fits to the lower edge of the door card and seals against the window -its not visible from the top, unlike the one which you want. Never had to replace that one fortunately.

[Rockettvr]

Paul
My fault I assumed it was the same seal I was after. Cheers ron

[mrzigazaga]

Hi Ron...You need something like this....
http://www.woolies-trim.co.uk/p-1259-window-weathe...

I did find the correct part but will have to have a better look...Cheers...Ziga

[mrzigazaga]

Im wondering if this may be better...Might just order a small sample to see...

ATJ1945 from... http://www.google.co.uk/url?sa=t&rct=j&q=&...

[Rockettvr]

Cheers for looking zig. Don't think they're quite right though. I think I need to do a bit of rooting around to find what I need
Thanks mate
Ron

[mrzigazaga]

I did post it up a while back but haven't been able to find it since.....Ill have another look...Ziga

[350zwelgje]

I have no seal on the outside of the window at door level at all an came original and well maintained from the first owner. Perhaps it rains less in the Benelux NOT.

There only used to be glued strip for cosmetic purposes that started unglueing and I got rid of that as well.
I like my wedge to be understated
It is only the noise that should set it apart of the rest of the world (me hooligan, no officer....)

Rob

[dixiebabes]

mrzigazaga said:

Hi Mate...Have you tried these guys?...Ziga
http://www.google.co.uk/url?sa=t&rct=j&q=&...

Just used that site to get some rubber seal for the edge of the folding roof, cheers Zig been looking for a while for that.

Dix

[mrzigazaga]

dixiebabes said:

Just used that site to get some rubber seal for the edge of the folding roof, cheers Zig been looking for a while for that.

Dix

No probs mate...They also do the bumper seal and i thought the "Waist seal" which sits at the top of the door...Although I'm sure i found that somewhere else..I found the chrome/Black type for the 280i...Have to keep looking....Cheers...Ziga