Discussion
Hello,
I need a new output shaft for my S2 :
http://www.tvrsseries.com/tvrparts/TVR%20S%20Secti...
(number 7)
I saw here that the shafts must be from a 2 liters sierra
http://www.parkersteve.dsl.pipex.com/sparts.html
so I think this part is the one I need ?
http://www.yakarouler.be/prix/cardan-transmission/...
anybody can confirm please ?
thanks
I need a new output shaft for my S2 :
http://www.tvrsseries.com/tvrparts/TVR%20S%20Secti...
(number 7)
I saw here that the shafts must be from a 2 liters sierra
http://www.parkersteve.dsl.pipex.com/sparts.html
so I think this part is the one I need ?
http://www.yakarouler.be/prix/cardan-transmission/...
anybody can confirm please ?
thanks
Hi Phill,
I remembered I already opened a thread here :
http://www.pistonheads.com/gassing/topic.asp?h=20&...
I had to move the car with that problem for ~60 miles and now I saw the wheel has a little bit of play.
So I think I need at least a new 41mm nut and MAYBE a new shaft nut (the part of the shaft where the retaining nut is screwed on, sorry I am not sure about the english terminology)...
I think this is the part on your picture :-)
I would have cut the nut and see if the shaft was damaged but my car is at the workshop and cannot be not movable...
I remembered I already opened a thread here :
http://www.pistonheads.com/gassing/topic.asp?h=20&...
I had to move the car with that problem for ~60 miles and now I saw the wheel has a little bit of play.
So I think I need at least a new 41mm nut and MAYBE a new shaft nut (the part of the shaft where the retaining nut is screwed on, sorry I am not sure about the english terminology)...
I think this is the part on your picture :-)
I would have cut the nut and see if the shaft was damaged but my car is at the workshop and cannot be not movable...
Edited by Lou013 on Tuesday 24th March 10:26
Gassing Station | S Series | Top of Page | What's New | My Stuff