Please post any hoarded parts you might have

in case they are wanted by other wedge owners.

Adam Quantrill
Some of this stuff has photos here:
For Sale
Brand new shinney V8 radiator caps. Treat your pride and joy!
350i original TVR Black mohair hood, rear section, brand new. Expensive though! Fits most ragtops.
Trailing arms - drivers side c/w bottom link; passenger side on its own.
Pair of 350i (smaller UJ's) driveshaft assemblies c/w stub axles and hubs.sold
Trailing arm style bottom link.
Trailing arm style lower diff cradle.
400SE front indicators (both sides)
350i/400SE fuego style rear light clusters
3 or 4 Cibie Airport driving lights, used.
400SE style dashboard leather console (actually ambla, grey)
3M Pinstripe: maroon (enough for one car), dark blue (loads), gold (loads).
Headlamp pod, a bit scratched but serviceable.
One V8 exhaust manifold, brand new, left hand side (passenger side, UK near side).
One mild steel centre exhaust section, 350i series 1.5, used but seems solid. 2 in 2 out Y pipes.
350i full engine (only 140k miles ;^)
SDi power steering rack c/w pump.
SDi 3.5L V8 engine, twin SU's.
Rev limiter (sic)

rev-erend
Overhead underhanger - fits any TVR
Bubbles for a spirit LevelGiven away free to CliveF

GV Andy C - GV
Series 1 Front Air Dam
2 x Dash
1 x Centre arm rest
1 x Dashboard - unveneered
2 x Door cards
Various Guagues
Momo Steering wheel
4 x 15" Lattice Wheels & Tryes (wheels need refurb)

Graham
Moulds I have, from the racing. Not upto quality of TET, where I suggest you go first but if your stuck I can make usable panels.

S1 boot lid ( outer only)
S1 nose upto and inc bulkhead
s1 350 bonnet ( outer only)
s1 280 front spoiler
s2 280 front spoiler

TVRLeigh_BBWR
To add to Grahams post
I now have the Mould for the one Piece Light weight Front end.(s2 280)


leorest
I'm not looking to offload any of this but if it gets someone out of a hole and back on the road then get in touch via profile.

• 1 Tie rod for A-frame rear suspension. Bushes OK, bit rusty but straight as a die.
• 1 Tie rod for A-frame rear suspension. Bushes OK, bit rusty & bent as a 5 bob note.
• Original drop links with powerflex bushes. Not so delicate patina of surface rust but otherwise sound. Worked surprisingly well with polyurethane bushes considering the design.
• Front Koni adjustable dampers (the ones you have to take off the car to set) Could probably do with a rebuild.
• Front Wedgeautomotive/RT adjustable dampers. Good general condition with slight pitting on part of the body. Adjusters NOT seized. These work very well. Still in use but will become available in the not too dim distant future...
• Rear Koni adjustable dampers (the ones you have to take off the car to set) Could probably do with a rebuild. Still in use and working well, but will become available in the dim distant future...

tbdgriff500
280 tasmin parts
whole car 1980 non runner
complete at the moment


iantor
TET series 2 rear bumper - brand new
TET 400 SE spoiler - brand new

crispian22
wedge head lamp pods and motors
new/old stock rear shock absorbers


Combine

Nexen 225/45/R16 , lots of tread ,nearly new ,2 tyres

Avon ZZ3 225/45/R16 , nearly new as above , 2 tyres
The above tyres now sold !

Blaineuk

4x15" O.Z alloy wheels and tyres (400se) all in excellent condition.now sold

Matt

Various 280i Parts all used: SOLD


MARSHO, I have a pair of large type drive shafts to suit the 350 etc for sale in the classifides .

NTEL
series 1 280i (now cut up and scrapped)


Green Star Sports Cars Blackpool.Tel:- 01253 343880.
1994, 350i Bonnet & Boot Lid.

taimar78
Front spoiler for S2 280i coupe (2 NOS)
Upper and Lower control arms for front suspension for 280i (used and in good condition)
Front anti roll bar for 280i (used-good condition)
Manual steering rack for LHD 280i (used-could probably use refurbishing)
280i Series 1 rocker panels (LH and RH NOS)
280i Intake Manifold (powder coated-like new)
280i Plenum Chamber (powder coated-like new)
280i Valve Covers (rocker covers) New-powdercoated grey (3 pairs)
280i Camshaft Gear (new) 3
280i Crankshaft Gear (new) 3

FlipFlopGriff
Series 1 280 shell - no glass, sunroof hole, both doors, bonnet, rear hatch
Series 1 280 chassis - chassis number unknown
Both are as one at the moment but could split.

aderut/member
3no 1987 interior lights with integral switches (free to good home)

david.h.gto I have an SD1 window mechanism (N/S As I remember!) which is the one used on Tasmins (certainly 280i's) It needs a very small mod to work on the Tasmin (a hole drilling & a small bend I think) I took the pir from a scrapSD1 & only needed the driver side. Also a Ford power steering pump that is VERY similar to the Tasmin's - I reckoned I would make it fit if I had to, but didnt need to! Sold the Tasmin to a nice bloke in Germany 4 years ago! Make me an offer 01789731042.


JMF894
For sale: Steve Heath Wedge Bible as new