Noble on a DYNO

[georgeo]

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

[steve1]

Mines off to be re-mapped next week, will post then.

Steve.

[alex s]

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

Loads have, very few make standard power, though one or two have.
Mine with blocked/knackered cats was 285bhp, with cats sorted and a couple of other bits...392bhp.

[georgeo]

alex s said:

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

Loads have, very few make standard power, though one or two have.
Mine with blocked/knackered cats was 285bhp, with cats sorted and a couple of other bits...392bhp.

What is standard bhp for 3.0?

[Twerlie]

georgeo said:

alex s said:

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

Loads have, very few make standard power, though one or two have.
Mine with blocked/knackered cats was 285bhp, with cats sorted and a couple of other bits...392bhp.

What is standard bhp for 3.0?

http://www.gto3.com/models/index.htm

[Adrian W]

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

581bhp @ 22 degees C

[FUNKSTER UK]

Adrian W said:

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

581bhp @ 22 degees C

Id love to feel that!

[daddysumo]

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

Dyno's can be very mis-leading so dont take the quoted figures as gospel. Gadge im sure will explain more but I have seen 50 bhp difference in my wheel power alone never mind the calculations to flywheel power !

Steve

[ThatPhilBrettGuy]

506.2BHP @ 26C

Limited to 431ft/lbs

[Twerlie]

FUNKSTER UK said:

Adrian W said:

georgeo said:

Has anyone had a 3.0 on a dyno, if so what sort of bhp figure have you seen?

581bhp @ 22 degees C

Id love to feel that!

Well, go outside, i'm sure it's about 22 degrees C today!

[FUNKSTER UK]

Funny

[Twerlie]

FUNKSTER UK said:

Funny

only kidding matey

[Jenx]

Twerlie said:

Well, go outside, i'm sure it's about 22 degrees C today!

[DeanoM12]

My GTO3 was 330 bhp and 360 ft/lbs in standard form. i am pretty sure Noble claimed 350 bhp and 350 ft/lbs.

[georgeo]

DeanoM12 said:

My GTO3 was 330 bhp and 360 ft/lbs in standard form. i am pretty sure Noble claimed 350 bhp and 350 ft/lbs.

Thanks for info.

[snuffy]

I got 329 out of mine. That's with no mods.

[NobleGuy]

My GTO3 2 weeks ago with no mods - 356bhp, 340lb torque.
Getting it upped to around 420-430 in the next couple of weeks.
Mortgage can wait a little longer .

[alex s]

NobleGuy said:

My GTO3 2 weeks ago with no mods - 356bhp, 340lb torque.
Getting it upped to around 420-430 in the next couple of weeks.
Mortgage can wait a little longer .

Bet that was at JNM RR.
Can I ask what they are doing to get it to that fig?

Alex

[snuffy]

alex s said:

NobleGuy said:

My GTO3 2 weeks ago with no mods - 356bhp, 340lb torque.
Getting it upped to around 420-430 in the next couple of weeks.
Mortgage can wait a little longer .

Bet that was at JNM RR.
Can I ask what they are doing to get it to that fig?

Alex

The old RR figures are always a bit contenious !!

My last motor, an Esprit V8, is support to be 350. I changed the exhuast to straight pipes, had sports cats fitted and put K&N filters on it and a local RR measured it at 425. 75 extra ponies for those mods, hmm, I think a lot of places give you a higher reading to make you feel happier.

[Jenx]

All dynos read differently...The best thing to do is use the same one every time you change something and work it out as a % increase rather than x bhp increase.

Martin.