Discussion
Depends where you want to install them.
The bigger the better as you are going to struggle to hear them and not much point buying the best as again you will not be able to 'hear' the quality.
Mine are in the side panel about alongside my knee. You have to choose the position carefully as there are chassis triangulation bars through that area which you need to miss. Can't remember what technical size they are but they measure 160mm dia. across the bezel.... centre is 170mm from the floor and 600mm from the front bulkhead.
Steve
Wok anyone?
The bigger the better as you are going to struggle to hear them and not much point buying the best as again you will not be able to 'hear' the quality.
Mine are in the side panel about alongside my knee. You have to choose the position carefully as there are chassis triangulation bars through that area which you need to miss. Can't remember what technical size they are but they measure 160mm dia. across the bezel.... centre is 170mm from the floor and 600mm from the front bulkhead.
Steve
Wok anyone?
Hi Mark,
You can find it in the buiders digest http://pistonheads.com/gassing/topic.asp?h=0&f...
You can find it in the buiders digest http://pistonheads.com/gassing/topic.asp?h=0&f...
Edited by UltimaCH on Friday 20th November 14:24
Gassing Station | Ultima | Top of Page | What's New | My Stuff




