Discussion
Anybody know whether the factory or Martin B do repairs to seats still. Got a small hole in mine,and a couple of local places don't want to touch it. I PM'd trimman as I thought he did these originally but didn't reply. Failing that anybody recomend anybody around Chesterfield (Mike T - bet you have some contacts ?)
Cheers,
Rob.
Cheers,
Rob.
Owd tt said:
Slightly off topic, but who produced the padded head rests for the seats? I'm not saying the seats are particularly uncomfortable on a long drive but I usually end up with a pillow behind my head to / from Le Mans. I'd like something a bit more refined. Was it Trimman?
I saw those once - they just pushed over the top of the seat. If you find out and they can make some more then I am sure a group buy would be in order - well done for volunteering Something like this in alcantara would be great
Edited by david.mt on Tuesday 7th September 16:32
david.mt said:
Owd tt said:
Slightly off topic, but who produced the padded head rests for the seats? I'm not saying the seats are particularly uncomfortable on a long drive but I usually end up with a pillow behind my head to / from Le Mans. I'd like something a bit more refined. Was it Trimman?
I saw those once - they just pushed over the top of the seat. If you find out and they can make some more then I am sure a group buy would be in order - well done for volunteering Something like this in alcantara would be great
Edited by david.mt on Tuesday 7th September 16:32
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy mr2turbo300 said:
Anybody know whether the factory or Martin B do repairs to seats still. Got a small hole in mine,and a couple of local places don't want to touch it. I PM'd trimman as I thought he did these originally but didn't reply. Failing that anybody recomend anybody around Chesterfield (Mike T - bet you have some contacts ?)
Cheers,
Rob.
Yep Phone Noble and get it booked in for a seat repair, my mate is one of the upholsters there and the quality of his work is first class.Cheers,
Rob.
They will modify the interior to your own specifications if you want and they also fully upgrade alot of Ultima interiors, basically they will cover all your interior/upholstery requirements.
Re. the headrests, I ordered some a few months ago for the M400 - as was said above, they're thinner and just push over the top of the seat - they also look great as they're in black alcantara with the M400 logo embroidered just like the seat. Got them via Martyn (Trimman).
Martyn runs the trimshop at the Noble factory now (rather than having a separate trim business), so if you want to get in contact with him, just phone the factory and ask to speak to him. Link is here.
They also do repairs as has been mentioned above too.
Conrad.
Martyn runs the trimshop at the Noble factory now (rather than having a separate trim business), so if you want to get in contact with him, just phone the factory and ask to speak to him. Link is here.
They also do repairs as has been mentioned above too.
Conrad.
[quote=C&C]Re. the headrests, I ordered some a few months ago for the M400 - as was said above, they're thinner and just push over the top of the seat - they also look great as they're in black alcantara with the M400 logo embroidered just like the seat. Got them via Martyn (Trimman).
Martyn runs the trimshop at the Noble factory now (rather than having a separate trim business), so if you want to get in contact with him, just phone the factory and ask to speak to him. Link is here.
They also do repairs as has been mentioned above too.
Conrad.
[/quote]
Conrad - thanks for that. I will call Martyn tomorrow and order some. If anyone else wants a set then let me know asap and I will see what they can do.
Martyn runs the trimshop at the Noble factory now (rather than having a separate trim business), so if you want to get in contact with him, just phone the factory and ask to speak to him. Link is here.
They also do repairs as has been mentioned above too.
Conrad.
[/quote]
Conrad - thanks for that. I will call Martyn tomorrow and order some. If anyone else wants a set then let me know asap and I will see what they can do.
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy sjc said:
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy david.mt said:
sjc said:
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy hi david iff any good as your only down the road you can borrow one of mine if you want and go and see a very helpfull polish man in walmgate at the alterarion shop near the press office dont know how or iff you would get the 400 logo on it though he may have the answers to that but he is very good at what he does just had him re cover some head rests for some dental chairs better than originals
sjc said:
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
Edited by trimman on Wednesday 8th September 23:33
Edited by trimman on Wednesday 8th September 23:34
trimman said:
sjc said:
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy trimman said:
sjc said:
david.mt said:
sjc said:
I had them on my 3R, and they push your head way too far forward, and the d velcro doesn't hold them on.When I got the M400 I has some made by the factory, I assume via Trimman with the M400 logo to match the seats, they lierally push over the top of the existing seat and are perfect.
Well that's what I want then - good shout for taking over the group buy PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
Edited by trimman on Wednesday 8th September 23:33
Edited by trimman on Wednesday 8th September 23:34
I have the thick ones at the moment but they are too thick.
However ... I have a custom interior ... with doe leather ... could you match it?
Or I could send you the larger ones I have and then you could reuse the leather and use them to retrim a set of thinner ones?
Thanks
P.S. Thanks to Simon for pointing me to this thread!! AWESOME!
trimman said:
Hi guy's I have quite a few headrest left over from Auto Interiors stock,Alcantara and Leather to match original standard trim,some thick and some slim ones.Also have Booster Cushions and other trim stuff.
PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
I did PM last week PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
david.mt said:
trimman said:
Hi guy's I have quite a few headrest left over from Auto Interiors stock,Alcantara and Leather to match original standard trim,some thick and some slim ones.Also have Booster Cushions and other trim stuff.
PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
I did PM last week PM me your contact details and I will get back to you and try and satisfy your requirements.Been meaning to list all items in the classifieds for the last 2 years,just not got round to it.
Martyn
Gassing Station | Noble | Top of Page | What's New | My Stuff