wheel bearing

[donkeasy]

Need new wheel bearing front and back.

Can any-one tell me what cartype they are from ford....
and give me the part numbers for SKF or FORD.

thx

[GTRCLIVE]

Ford Granada Mk2 front and rear....

[donkeasy]

Is that the same as a ford taunus?

[GTRCLIVE]

http://www.youtube.com/watch?v=wB4ZXkC3Fhs&fea...

Looking at some pic's on Youtube it seems to also be referred to as a Taurus..., but in briton it was only reffered to as the MK2 Granada....

[dal2litrefrogeye]

Hi all the taunus was the euro name for the cortina , the granada was always the granada , i belive ( and ill stand corrected ) the name granada came from ford of Germany , ill take my anorak off now

[donkeasy]

we had that granada also here.
I will go to the ford dealer
and see if I can get hold of a set.

[Steve_D]

UPRIGHTS FRONT  
Front Upright 2
Front upright inserts top 2
Front upright inserts lower 2
Steering arm 2
Capheads M10 x 45mm 4
Washers M10 SCHNORR 4
Hub 1
Nut 6114 694 LF 1
Hub 1
Nut 6132 336 RF 1
Washer 6127 922 2
Wheel bearing 6127 817 F 4
Bearing spacers F 2
Oil seal 1625 935 F 2
Dust cap 6142 524 F 2
Long wheel studs 10


UPRIGHTS REAR  
Rear upright 2
Crush tube 5/8" fitted 2
Hub 1637 225 2
Nut 6133 689 L 1
Washer 6102 937 2
Stub shaft left 6146 627 1
Stub shaft right 6146 631 1
Wheel bearing 6140 418 4
Bearing spacers 2
Oil seals 6140 417 4
Long wheel studs 10

Sorry for delay......forgot I had these in a spreadsheet.

Steve

[donkeasy]

I made a 4 hrs trip around eindhoven and:
The local forddealer says; not in the program anymore.
SKF and carpartshop-guys look at me; Ford Granawhat......
Numbers? wherefrom, what why, where. Got a bit fed up.

So looks like I have to wait for my bearings
as long as Ushi has to wait for her guy from Hamburg.

[Steve_D]

Try searching for
BRT909
BRT910

That is how they apear on my purchase invoice from back in 2003.

A quick Google finds both and also points at other part numbers from Quinton Hazell. I will leave you to search for your best price or try the QH numbers in your local bearing supplier.

Steve

[donkeasy]

thx steve

Will try that tomorrow