What is the best car cover to have?
Discussion
Hi all.
Im after a good quality car cover for my tuscan mk1. I had one for my old chimaera but it wasnt the best, it was semi waterproof and seemed to sweat alot underneath, causing the paintwork to bubble in places!
So i am on the look out for a waterproof cover but which breathable and doesnt cause any damage to the paintwork.
If anyone could recommend any decent companies out there or point me in the right direction i would be very grateful.
Thanks chaps.
Im after a good quality car cover for my tuscan mk1. I had one for my old chimaera but it wasnt the best, it was semi waterproof and seemed to sweat alot underneath, causing the paintwork to bubble in places!
So i am on the look out for a waterproof cover but which breathable and doesnt cause any damage to the paintwork.
If anyone could recommend any decent companies out there or point me in the right direction i would be very grateful.
Thanks chaps.
This post will be helpful, you'll see my recommendation with pics halfway down:
http://www.pistonheads.com/gassing/topic.asp?t=103...
CoverYorCar 'Stormforce' and Hamilton 'Classic' get good reviews.
HTH. Grant
http://www.pistonheads.com/gassing/topic.asp?t=103...
CoverYorCar 'Stormforce' and Hamilton 'Classic' get good reviews.
HTH. Grant
Personally, I find amy garage is ideal, if not, how about this,
http://www.pistonheads.com/sales/3396086.htm
http://www.pistonheads.com/sales/3396086.htm
I have had lots of different covers but never found anything that fitted or done what was advertized. But I bought a taylor made one for my mark 2 tuscan from these guys. specialisedcovers.com
Worth the 4 week manufacture time and cost.
Got the tvr badge machined in 3D with the colours I wanted. Looks well and fitted snug.
Worth the 4 week manufacture time and cost.
Got the tvr badge machined in 3D with the colours I wanted. Looks well and fitted snug.
Covercraft weathershield was excellent for my Mk 1 for 3 yrs outside; as it got older, it did get a little looser, but still superb and good for the paintwork. Just wished they had not kept on increasing their prices so much...
http://www.covercraft.com/weathershield_hp.htm
http://www.covercraft.com/weathershield_hp.htm
I am using car cover which I recently ordered from amazon.
It's material and quality is very good.
It protects from sun, rain, etc.
Find more here: http://www.nationalcarcovers.com/
It's material and quality is very good.
It protects from sun, rain, etc.
Find more here: http://www.nationalcarcovers.com/
Re microblisters, some interesting information here:
www.hmgpaint.com/knowledge-base/blistering-the-cau...
Had the cars in the photos above been resprayed, I wonder?
www.hmgpaint.com/knowledge-base/blistering-the-cau...
Had the cars in the photos above been resprayed, I wonder?
Edited by noisynorton on Monday 17th November 14:11
I think mine were caused buy the cover being a tight fit and last winter when it done nothing but rain. The cover no doubt become completely saturated and given it was constantly wet and didn't get time to dry out causing the blisters from the water getting into the paint. Then when the weather warmed up they expanded and caused the blisters.
Good article by the way.
Good article by the way.
Whether or not to use a cover (and which one) is not an easy decision, and problems like those above do make you wonder......
My garage floor gets damp in the winter and after getting a lot of condensation on the chassis I decided my Chim would be better off in a sheltered spot in the yard under a breathable cover, because winter road salt + condensation will absolutely murder the chassis. I've used "Coveryourcar" Stormforce covers for a few years (I'm on my second) with no problems and the paint still looks like new, but there are a few riders:
1. Don't have the cover too tight to allow air to circulate
2. Don't cover a wet or dirty car
3. Take the cover off periodically to allow everything to dry out (I try to do this every 2-3 weeks if I haven't used the car)
(The above are in the instructions with the Stormforce cover)
In addition I keep the paint well waxed & give it a quick going over with Meguiars spray detailer before fitting the cover. I'm also absolutely meticulous handling the cover to make sure no dirt or grit gets on the inside surface.
What I really need is a dry, heated garage, but I'd have to sell the Chim to pay for it........
My garage floor gets damp in the winter and after getting a lot of condensation on the chassis I decided my Chim would be better off in a sheltered spot in the yard under a breathable cover, because winter road salt + condensation will absolutely murder the chassis. I've used "Coveryourcar" Stormforce covers for a few years (I'm on my second) with no problems and the paint still looks like new, but there are a few riders:
1. Don't have the cover too tight to allow air to circulate
2. Don't cover a wet or dirty car
3. Take the cover off periodically to allow everything to dry out (I try to do this every 2-3 weeks if I haven't used the car)
(The above are in the instructions with the Stormforce cover)
In addition I keep the paint well waxed & give it a quick going over with Meguiars spray detailer before fitting the cover. I'm also absolutely meticulous handling the cover to make sure no dirt or grit gets on the inside surface.
What I really need is a dry, heated garage, but I'd have to sell the Chim to pay for it........
Message Board | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff










