Early 280i mirrors
Discussion
Grady said:
There should be a link by me about donor cars (BMW 80s 3 series) that had the same adjusting motors and thus (presumable) the same mirrors.
ETA - as to an 1986, not sure about the early ones. Oops
Not completely true - the motors were shared between few million EU cars, but the mirror pods/whatchamancallits themselves were different.ETA - as to an 1986, not sure about the early ones. Oops
The actuator was the same IKU unit BMW, Saab etc used, but TVR removed the weatherseal (no space for it in the pod) and also ground some of the plastic away from the actuator. Removal of the weatherseal means that if not periodically used, the motors freeze. Opening the actuator and with the aid of WD40 and a bit of brute force, the motor can usually be salvaged (done it 3 times now).
So, if you get a BMW mirror, the actuator is unlikely to fit to a Wedge without a bit of TLC (even though it is the exactly same actuator).
And, as said, the actual mirror body/pod can be almost anything.
And, yes, my info is also for Series2 kit.
Gassing Station | Wedges | Top of Page | What's New | My Stuff