inner tie rod 400SE
Discussion
MOT time for the 400SE is coming up, some minor challenges to face on forehand.
I've tried the search option, but could not find the answer were i was hoping for. On the passenger side, the inner tie rod end is having play. Does anyone know where it is sourced from? Cortina MK4/5 just like the outside?
Cheers!
I've tried the search option, but could not find the answer were i was hoping for. On the passenger side, the inner tie rod end is having play. Does anyone know where it is sourced from? Cortina MK4/5 just like the outside?
Cheers!
Usually it's the nylon bush inside that thing you can turn and see in the picture, wearing out. So you need a new bush (which are stupidly expensive for a little bit of plastic).
You can as a short term measure just nip it up for the MoT. But if the bush breaks up it will cause more expensive wear on the metallic parts.
Also - it's called the "inner track rod end".
You can as a short term measure just nip it up for the MoT. But if the bush breaks up it will cause more expensive wear on the metallic parts.
Also - it's called the "inner track rod end".
Edited by adam quantrill on Friday 12th October 17:09
Gassing Station | Wedges | Top of Page | What's New | My Stuff