G20 Junior Coupé, (FIA) certificate for rollcage anywhere?

[GinG15]

does anybody know where i could get a certificate (possible FIA) for the rollcage of a g20-GT4?

the factory says, that they do not store any records anymore about those models since LNT group has purchased ginetta.

at least a certificate of the material used and the wall thinkness would help.

[Grantura2a]

Google "2014 Protyre Motorsport
Ginetta GT5 Challenge" or go here. May be some helpful info
<http://www.ginetta.com/images/_uploaded_images/FILES_GT5/Protyre%20Motorsport%20Ginetta%20GT5%20Challenge%20Regulations%202014.pdf>

[GinG15]

i´m talking about a G20 not G40 and G50 as in your links!!!

[foggy]

IIIRC the linked regs doc refers to G40 at the start then to the G20 later on as both cars raced together for a while. Might also be worth checking the older Ginetta Junior series regs as they originally used the G20 coupés with a 1.4 engine I believe.

[GinG15]

yes....G20 Junior with 1.4l engine...exactly...any links to the old reg´s? built manual? etc...

[foggy]

http://www.motorsportireland.com/Libraries/Technic...

They still use the G20 coupé for the Irish Juniors by the looks of it. See safety regs on first page - details roll cage approvals to FIA regs. Found by googling 'Ginetta Junior G20 coupe regulations'.

[GinG15]

thanks for the link...that may help us in the first step...but it wont replace an offical approval certificate.

[Grantura2a]

The links cover G20. Read the whole document. Use the find or search feature looking for G20 will get you down to section 6. Basically the same info as the Ireland link.

Edited by Grantura2a on Tuesday 13th September 16:23

[GinG15]

Roll Cage with side and rear safety protection bars in
compliance with MI Appendix 2, Article 16 of the
2016 Yearbook compliant with FIA Appendix J
159.15.1.

ok...this is some info....but its not a written prove.

anyway...meanwhile i got a certificate at MSA. you need to pay a certain amount of money and they will sent you a certificate from their database.

[GinG15]

any chan`ce to get a pdf built manual of a G20?