T350 / Sagaris / Tamora / Tuscan Mk3 speedoplates in km/h

[maxkressbronn]

Hi, I am on the move to get speedo plates in km/h made for the above models. The plates will be as the original plates laser cut 0.5mm aluminium, anodized and printed in black bold letters as the original print was. Deviating from the original there will be enough numbers to actually read the speed ;-)

I'll do two and three digit versions.

Naked plate:


2 digit print (don't get mislead, print will be as original letters)


3 digit print (don't get mislead, print will be as original letters)


Costs will be 95 Euros international tracked shipping from Germany, I think I'll be ready to ship by mid of June. Please let me know if you are interested so that I get an idea of how many I should do. Thanks, Markus

[sanquin]

Great initiative Markus, I’d like one. Still making up my mind on the 2 or 3 digit one. When do you need to know my choice?
Wiebe

[Brithunter]

Wonder if it would be possible to get plate in kmh for my early Chimaera? no trip meter in mine.

[maxkressbronn]

No need to decide right now, just want to get a feeling for the quantity.

[RobertoBlanco]

Hi Markus, you can count me in for sure! I'd definately have one but not so sure on which layout to choose.

[mojikosu]

Hi!
That’s a great idea! Please put me down for a 2 and for a 3 digit version.
Greets from Luxembourg

[TVRnutcase]

Put me down for one - Probably be 3 digit one

[Getsis]

Why not have both MPH and KMS?






I must warn you the needles are glued on and are very difficult to remove without breaking!!!!

Edited by Getsis on Wednesday 25th April 14:13

[maxkressbronn]

Thanks for the info, I thought this might be a difficult part of the swap. The unit I have to measure all the dimensions had no needles, hence I do not have own experiences.
How did you get them off? Maybe somebody has an example for me and I get them made as well...just in case.

[Getsis]

I use a craft knife and Acetone (Wifes Nail varnish remover) until it popped off.

[maxkressbronn]

Little update, plates are cut and with anodizing shop right now. Next is print shop, hope to be able to post a picture in two to three weeks.

[RobertoBlanco]

Thanks for your effort mate.

[maxkressbronn]

Little update: Plates came back from anodizing shop but I wasn't happy with the result, the color was too dark and slightly with blue shades. After some unsuccessful discussion with them I have the plates out to another anodizing shop, he believes he can do better. Keep fingers crossed.

[unariciflocos]

Hi Markus, have you had any success with these?

[maxkressbronn]

It worked out ok with the other anodizing shop and I still have some left

All types, that is the combination as shown (3/2 digit) plus 3/1 and 2/1 and Tuscan Mk3 with 0-320 kph 3 digit and 1 digit 0-8000 rpm with 7 to 8 in red color....really nice. regards Markus

Edited by maxkressbronn on Monday 30th November 14:07

Edited by maxkressbronn on Monday 30th November 14:07